Puttin on Twins,

[WMoroni]

I've had a set of PDR towing twins laying around for over a year now without the time to install. Well yesterday I had the front end tore down getting new ball joints and found out Napa sent me 3 uppers and one lower (Yeah I shoulda checked all four boxes before I took the truck apart) , But anyway with the truck disabled all day I finally had time to do the twins. We got stock stuff cleared out and have started in with the new. Should finish pretty easy tomorrow. The only problem I have had so far is that a picture is worth a thousand words. And my instructions had to be faxed to me (lost the goods some time over the last year) and the pictures are worthless. The part I wanted to see was how the turbos were clocked. I don't understand why PDR didn't have the turbos clocked correctly when they sent them but they didn't and couldn't really explain why. For that much money it looks like they could have done that small step. But other than that every thing else looks great. If tomorrow goes with out glitch I'll tell you how they do.

 

[WMoroni]

Got the twins on. The install was not to bad. the Fit is verrrry tight in a couple places . Everything is almost touching something. The truck is very quiet even with just the 5" down pipe open. I haven't hooked the exhaust back up yet. They spool very quickly but I haven't got to drive them much. The bummer is I got a bad turbo. It is blowing motor oil out the exhaust. Best I can tell, without taking everything back apart it is the bottom turbo leaking out the exhaust side. I've got to take some more tubes off to make sure its not blowing oil thru the intake, but it all has to come out anyway to get the bottom turbo back out. I talked to Mark at PDR on friday and I have already checked the obvius things such as a kinked or plugged oil return line. No such luck. Kinda a bummer but oh well it happens sometimes. I guess while its down this week with all the stuff off of it Im goin to pull the head and put in some studs maybe even some injectors too.

 

[WUnderwood]

definately keep us updated on your progress