Pyro Probe install

[RGramlow]

I am going to drill my manifold and install a pyro probe, is there a divider in the middle of the manifold like the newer pickups, or can I put the probe right in the middle. Or where are you guys putting the probes. Is the front or rear any hotter than the other? Thanks

 

[blacksheepdiesel]

RGramlow,

Yes, there is a divider. Normally installed in the rear half, would tend to be hotter.

Godspeed,
Trent

 

[JacktheBear3]

RGramlow,



Yes, there is a divider. Normally installed in the rear half, would tend to be hotter.



Godspeed,

Trent

Agree with Trent...

 

[RGramlow]

alright, thanks alot, rear half it is

 

[DVolk]

What is the pros and cons of installing the prob in the pipe right after the turbo? I got trucks were there installed in the manifold as well as the pipe



with the same results , ,not by me ,when i bought them , only thing i noticed so far is the prob is in the manifold i have to replace more often un like the pipe installed ones

 

[Philip]

Running the probe in the pipe will normaly give you a reading that is 300 to 400 degress cooler than before turbo temps.

 

[HighRanger]

When I did my Edge kit they strongly recommended installing in the manifold I know on my 04 it was a pain in the rear to find a flat spot to drill. Mine is at a slight angle into the down part right before the divider.