Quadzilla Install- Locating Rail Pressure Sensor on 2006 2500

[Kayaker]

I am installing the Quadzilla Fuel Pressure Kit and having trouble with the instructions that came with it for connecting the Fule Rail Pressure Sensor wire. First, I can't definitively locate the Fuel Rail Pressure Sensor. It says to tap into the Green wire close to the Sensor. What I think is the Senosr has no green wire. Can anyone help?

 

[Paladin1911]

There are 2 sensor connections on the rail. The one closest to the driver is the MAP sensor, the one forward of it is the rail pressure sensor. Tap the middle wire. On my truck it's a pink color with a black stripe.

 

[Kayaker]

Thanks, Paladin1911! I'll give that a shot... now I know for certain that is the Rail Pressure Sensor. On mine the center wire is Yellow/dark brown.

 

[Paladin1911]

No problem. Good luck and give a shout if you have any other problems. There's a lot of us running a Commander around here. By the way, welcome to TDR!

 

[Kayaker]

Paladin1911, Thanks again... seemed to work fine! I have completed everything except the EGT installation... . thought I would wait and handle that as a standalone project to allow me enough time to go slowly and accurately Thanks for the welcome... I have been a regular reader but have made few postings. This is my second Cummins, my first a '98 with no mods which my nephew is now driving... . has about 380,000 miles now and still rumbling along. It was a great truck and I am hoping for the same from this one.



Thanks again!