Engine/Transmission (1998.5 - 2002) quick lp relo. question

[VolsFan]

Hi, I know this topic has been discussed ad nauseum, but I am wanting to relocate my lift pump with a big line kit, and after much research on this site, I still have one question. I am looking at two kits, and want to know which one I should go with, more bang for my buck. BIG LINE transfer pump relocation kit from Genos, or Vulcan pusher pump system from Vulcan performance

These may even be the same products, I'm not sure, they are obviously both made by Vulcan, the prices are both $115, but the Genos ad explains the product very well, tells me the size of the fuel lines, etc. , the vulcan performance site is kind of vague, not really sure if it is a big line kit or not, I just want to know what I am getting.

Any information would be appreciated, really looking forward to getting this job done, have been really nervous about my fuel pressure since I replaced that expensive VP a few months ago, constantly looking at the fp gauge, hoping this will give me some peace of mind.

 

[benhall]

Both kits are the same. I decided to get the braided line from the FF housing to the IP instead of having to cut a chunk of hose for that section.

Ben

 

[JOdell]

I went with the big line kit on my truck this past summer. I would go with Geno's. I went with Geno's on this as I have with other stuff. Geno's is great, I just can't say enough about their service. As do most people on here. I got detailed instructions with my kit. Their instructions give torque specs on the hose fittings. It doesn't take a real long time to change the LP over. (Try to do it with every little fuel in the tank. ) My LP went out around October. But the fuel pressure gauge and the LED light I put in the truck did their jobs. I shut it down quick and got it to my work. The nice thing was I replaced it in less than 1/2 hour in the parking lot at work. -Jason

 

[VolsFan]

Thanks for the info. , I just ordered the big line kit from Genos this morning. I'd love to get the FASS to go with it, but I got a semester left in college so I'm still pinching pennies. This will be a good project since I have to get under there anyways and check the rollover valve on my fuel tank, according to you guys. Thanks again

 

[litespeed]

I would go with Geno's. I went with Geno's on this as I have with other stuff. Geno's is great, I just can't say enough about their service. As do most people on here. -Jason

+ 1



They are awesome!!