Here I am

Competition racing carnage

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Competition Groups of Racers?

Competition SLED PULLER's 2003 OPENER!!!!

Well it finally caught up with me,all my 4wd launches must have taken there toll. I snapped my output shaft while building boost to launch the truck. Last I seen was 20PSI and then snap ,it was over. I knew right away what I did. I left the front driveshaft out for now until i find a solution,since I cannot resist temptation,and will break the new one the same way if I dont. The most embarassing part of the entire ordeal wasnt losing to the camaro SS by default ,it was getting towed by a PSD tow truck,but at least the tow truck had a straight pipe and a 50hp chip:) .
 
John,

Sorry to hear about your misfortunes! It would be nice if we can isolate the breakage to something outside of the transmission. So, you didn't get any runs in at all? If so, what was your e. t. ?
 
Originally posted by HoleshotHolset

Snow man: Time to start a 'carnage shelf'..... every good shop has at least one.



Matt



Yeah the one Hovey(Massdiesel) has is just about full... :D



I'm planning adding my contributions to his "shelf" this weekend when I go up there... :p



Andy
 
Cryo

John, when Chris broke his output shaft we had an outfit cryo one for his truck. It's still holdingOo.
 
Compared to our truck you guys are rookies in the carnage business. With our testing,drag racing, power braking and me driving it gently daily ;) ;) Bill broke 3 output shafts and I broke 1, 2 of them were factory , 2 of them were cryo.



I took out 3 vp 44 pumps, 3 factory lift pumps, 2 mallory lift pumps, 1 cylinder head, 2 turbos, 1 rear end, 12 u joints, 1 complete drive shaft, 1 pinion yoke, we mysteriously went through 5 sets of tires somehow :D :D



And now the batteries gave up after 160, 000 miles.



I am now driving a duramax, Shanti took the dodge and gave me the duramax , something about abuse:confused:



Bill said its all sled pullers fault.
 
Be carefull what you ask for. Last time I saw you you told me that you were trying to break it and couldn't figure out why it had not. But it did launch nicely.
 
Gene is the reason why we all grenade parts.



One popularly held theory is that he has little voodoo 'dolls' representing all our trucks. In an effort to win at the pulls or the strip - he removes vital parts or damages them.



Remember the 'carnage god' ?(very similar to the 'hangover god' or the 'how did she find out about that?! god') - Gene is the personified version of that.



Matt
 
Johnboys wife has blamed me for years for his dismal attempts at hp.

I imagine maddoogie has me on the garage wall as a dart board also.

Now Kondolays. :rolleyes:

Sutton, HVAC, etc... .....





Matt, you are giving too much info. BTW, checked your truck lately?



I guess I am a Demigod, at least!!!
 
Gene:



I think you're taking my truck's voodoo doll out to dinner and so forth. Every time I play with it - it keeps smoking more and more. :D



Matt
 
My shaft was a stocker, I didnt get any runs in,it broke on the first run. Next time I go ill have a spare OD unit set up,so I can swap them at the track. Matt, my carnage shelf is slowly growing :D , Ill add the output shaft to it now along with my flexplate(its cracked),but didnt fail yet. I have another stock output shaft in it for now. I had launched at 20PSi + for almost 2 yrs now, so i had it coming. It was very embarrasing to break at the line,on the first run after driving 2 hrs to get there :( .
 
Last edited:
Back
Top