Here I am

rail cap and dual feed line

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

P-pump conversion. Pros & Cons

thermocouple placement/EGT diff's?

Status
Not open for further replies.
I am going to be installing a set of F-1 flux's 3. 5 and a floor it diesel stage 3 cp3 I have always heard a plug in the top of the rail is bad for a daily driver how is a plug in the rail different from taking the pressure valve off to instal a dual feed line? Will it hurt me to install a plug in the top of the rail??:confused:
 
Mod the Rail and you will NOT have to remove the LV and dual Lines are not neccsary. . Do a search I have cover this many times, although I do not mind friendly reminders.
 
T&C,

How much horse power would I see out of a single feed modded rail with the mods I have listed in my signature?

My truck is a daily driver and performs well with no compromise, would I loose driveability by modding the rail? What's the cost?
 
My guesstimation is:

T&C,



How much horse power would I see out of a single feed modded rail with the mods I have listed in my signature?



My truck is a daily driver and performs well with no compromise, would I loose driveability by modding the rail? What's the cost?



You are pretty well modded so I would guesstimate 20hp to 30hp range. Think you've got enough fuel pump there,..... :-laf :-laf :-laf
 
Last edited:
T&C,



How much horse power would I see out of a single feed modded rail with the mods I have listed in my signature?



My truck is a daily driver and performs well with no compromise, would I loose driveability by modding the rail? What's the cost?



No ,You will not lose any driveability, some off the line performance is gained. . You will have to PM or call on the Cost.
 
I am hoping that the rail shows well this weekend in Kentucky and that New records are made,I spoke to one customer last night and is hoping to break 1200 hp
 
TWest, can you point me to a thread about this modded rail you sell or pm me with some info? I'm very interested... Thanks
 
Status
Not open for further replies.
Back
Top