Ramifier and Power Pup

[JKloppe]

I've got the pup on the lowest setting, and it runs good. Makes great low end power. cant stay in it for ever but egt arent to bad.



Is any body else running pressure box with the pup

 

[MichaelWright]

I'm running the EdgeEZ with my pup. They work well together. I do have to send the pup back for a reflash, it took away my cruise control. Called Justin at BullyDog, told me to send it in, they have a fix.



Right now, I have the pup set to perfomance setting, and 4 on the Edge. Fuel milage is much better on performance, then on the extreme setting, but take off is slow to build now. I wish fuel was cheaper and my right foot lighter, it would still be in Extreme mode, man she flys!



I don't think I would even know the pup is on if I was to set it to tow mode. As far as EGT's, the performance mode keeps me under 1100 at WOT. Extreme mode would easily see 1400+ at wot, but man she will drink the fuel.



Stack away!



Make sure your pressure box is disconnected when you load a new pup setting. Load the pup, and then hook up the pressure box.



Mike

 

[fencebuilders]

I've got the pup on the lowest setting, and it runs good. Makes great low end power. cant stay in it for ever but egt arent to bad.



Is any body else running pressure box with the pup

I am... ...

 

[BCarmicle]

This may be a stupid question that has already been answered, but does the power pup mother itself to the first truck it downloads too or can it be used on more than one truck?



Brandon

 

[FDavid]

This may be a stupid question that has already been answered, but does the power pup mother itself to the first truck it downloads too or can it be used on more than one truck?



Brandon

Once you download the stock setting back on your truck then you can use the downloader on another truck.

dave

 

[JStieger]

Make sure your pressure box is disconnected when you load a new pup setting. Load the pup, and then hook up the pressure box.



Mike

What if you also have the Outlook - do you have to disconnect the Edge prior to switching Power Pup programs via the Outlook? Thanks

 

[JEly]

What is the reason for having the pressure box disconnected before you load a different program on the pup?



Jim