Rear Wheel Liners for Dually

[MHalberstadt]

I purchased the Dodge Rear Wheel Liners part number 82207367.



Is this part number fit the dually fender well? They look like there too wide for the inside wheel and not wide enough for both.



Tried searching the forums but never saw if these fit the dually.



I don't want to tear them up figuring it out and not be able to return them.

 

[WSnyder]

Part #82207367 liner kit is what I installed on my SRW truck. They looked big & wide when I received them but they slid in nicely after a little juggling around. I would think it should work for the inside wheels on the dually but I don't really know.

 

[FJfonda]

MHalberstadt,

On my '99 I easily adapted the SRW wheel liners to the DRW application. I have a set for my 04. 5 and will be adapting them sometime in the near future... . it looks to be a simple enough task but I haven't had the time to take the wheels off to tackle it. Probably will do at the first tire rotation.

 

[wild-t]

I just looked on my 04. 5 dully and there is a liner. No mud etc. can get beyond the wheel well - front or rear.

Are you talking about covering the 4" to 5" opening next to the inner tire - from the bottom of the inside rail (just above the frame) to the lower part of the leaf springs?

Is this an area that needs to be covered?



I don't have any off road experience to know if this area is an issue.

 

[Thomas]

Originally posted by FJfonda

On my '99 I easily adapted the SRW wheel liners to the DRW application . . .

Probably not a major adaptation since P/N 55346010 SHIELD, Wheelhouse is used for both left and right liners for 1500, 2500, and 3500 second generation Rams

 

[FJfonda]

wild-t,

You are correct... there is much area to cover with the wheel well liner... ... most of it is against the frame side of the wheel well.

Thomas,

On the '99, liners went in easily but I had to fabricate a panel to bridge across the top of the wheel well.