2nd Gen Non-Engine/Transmission Relay block?

[Kwoolley]

I'm installing aftermarket lights and want to run them through relays. Specifically, I would like to find a relay block that will hold up to 4 relays with fuses onboard. Does anyone have any insight as to whether or not such a thing exists? Help will be greatly appreciated.

 

[Thomas]

You may have to settle for separate relay sockets and fuse blocks like these: https://www.turbodieselregister.com/user_gallery/displayimage.php?&photoid=23410&width=3&voteval=10

 

[bmoeller]

http://www.genosgarage.com/CoastalData/showdetl.cfm?&DID=30&Product_ID=179&CATID=1



www.painlesswiring.com

 

[Allnew2Me]

You can get all the parts here if you don't mind a little assembly. The painless kit is nice but at $50 bucks it is a bit pricey for what you get. I bought the relay sockets and ganged them together. The fuse blocks are cheap also and you can wire them hot or ignition hot as you wish. http://wiringproducts.com/

 

[Kwoolley]

Thomas,



Thanks for help and eye candy, it's exactly what I am looking for. Question is: where do I get it?

 

[Thomas]

I got them here (pages 54 & 60 of their catalog): http://www.wranglernw.com/

If you go with their micro relay sockets you will need two . 250" terminals and three . 187" terminals per socket.

I put them in a project box mounted on my trucks PDC, routing the wire so the PDC still opens easily.

https://www.turbodieselregister.com/user_gallery/displayimage.php?&photoid=23125&width=0

https://www.turbodieselregister.com/user_gallery/displayimage.php?&photoid=23412&width=0

 

[SBettencourt]

I purchased some relay sockets from Bulldog Securities that have nesting tabs built into them. I have a rack of 4 set up in my 1500 for the remote start and keyless entry.

I haven't seen 'em anywhere else but I imagine they must be some stardard item.

It is their PN 766. This link might get you close.