2nd Gen Non-Engine/Transmission Remote Start?

[EBottema]

Anyone ever put a remote start and a manual 12v? I know they state they are for autos for safety reasons. but it would be cool. . Let me know if you like it and what one you used and ease of installation





Erik

 

[mroidt]

Remote start for manual

Hey

Designtech and Auto command (same company) and many others make a remote starts for manuals. They can be found on ebay and pepboys, and probably other automotive sites.



If your getting it for a diesel make sure it has a wait to start option, it runs off your manifold heater light.



Just because it says diesel option don't bet that it has wait to start , it usally means extended crank.



other companies have models that have turbo cool down timers .



On ebay just do a search on remote start manual, and if that don't work take off manual and start reading.



I've put a few design tech on cars it takes time to do it right,and they work great . worst part most times was finding wires, but 12volt.com is a big help for that. Still looking for a deal on ebay for one on my truck, had a couple and didn't bid enough.

 

[EBottema]

Do you know if autocommand has a turbo idle timer for shutdown? Also, does the manual version not allow truck to start if it is left in gear??



erik

 

[Turbo Tim 1]

Here: Search function: Typed in "Standard Remote Start"



Came up with 15 threads with some useful information

 

[mroidt]

EBottema

Yes, do a search on Designtech and I'm pretty sure they explain it somewhere, I'll try to find it and post it.

 

[mroidt]

Erik



www.designtech-intl.com



There website isn't the best but go to press release and there's comparison chart.

But I'd call there 800 # for any good info.



illflem had this on that other thread



http://www.powercallsirens.com/designtech.shtml



If you want an alarm .





Marc

 

[EBottema]

Thanks for the info... Only problem is the truck im looking at is ST (no power locks) I want to convert to a keyless entry/power locks. I dont want to drill the door panel so i was looking and autoloc has a nice setup. trying to figure out if i could get everything to work on one remote... anyone convert to power doors ???





thanks

erik

 

[mroidt]

You can go to Ebay and buy kits , same they use on Hot Rods.

Just do a search on power door locks or lock and you'll get more than you want .

Then you can just hook it up to your remote car start with keyless entry .

And you won't have to drill your door panel .