I have a 2004 Ram 2500 5. 9 cummins. My problem is that I can not get the right side trailer Brake and Turn Signal operating. Parkinf lamps lite ok and left side works properly. I checked all wiring on trailer and it is all good. (Checked with meter continuity) I have also checked the wiring in the truck and I am getting no voltage on the green wire to the 7 pin trailer connector. I then proceded to check the fuse (#46) and it checks good. I can hear the relay clicking in the front control module yet I am not getting any voltage to the 7 pin connector. I then checked continuity to c 217 connector and to C1 connector on bottom of IPM (Integrated Power Module). I believe that I have a bad FCM (Front Control Module) Is there anything else I can check before I go and spend $240. 00 on a new FCM. anyones help in this matter is greatly appreciated.