2nd Gen Non-Engine/Transmission Running Lights quit working, help!

[Bandit1]

for some reason my running lights on the truck quit working the other morning, at that time i could jiggle the headlight switch and they would come on, by now they jus tdont come on at all. so when drivign at nighti have no running lights and no instrument lights. i do have turn signals and brake lights so i know that the lights are getting power. plus i changed out the switch for a brand new one from autozone last night and i am in the same boat. i checked all the fuses and looked for burnt wires and found none. any suggestions would realy help. thanks josh

 

[Reno Guy]

Check your daytime running light module. It should be on the driverside fender, its a black box about the size of a brick but 1" thick. It will have a cable plugged into the end. I replaced mine for about $110. 00.



Just something to check as far as daylights go, not too sure with the dash lights though.



Good luck.

 

[JJ Jackson]

Mine is a 99 and when I blew the running lights, it blew the relay thats located in the black box in the engine compartment on the driver side fender... . Good luck ... ..... Jim