S. MI Dyno day

[I-6DZL]

LOL, can't calm down. Sure could have used your help tonight though

Thought about callin, but didn't wanna interrupt.



Curtis

 

[DISPATCH]

man now im thinking about not going to cali ... ... any body wanta free ticket to cali and free stay with a good lookin blonde?????



Just kidding man i do wish i could come ill be callin you guys to see how things are goin





hope yall have fun with out me





drew

 

[I-6DZL]

Drew don't worry..... Well take plenty of pics to rub in your face!!! Make sure you do the same for us LOL



Have a great time out there, sure you can't postpone for a weekend ? The truck needs some attention too!!!



Curtis

 

[Babyfat]

DID WE BREAK 20 YET? Oo.



3 DAYS TILL CURTIS'S JACKSON THUNDER



SUNSHINE, COLD BEVERAGE, LOTS O BS AND LOTS A BLACK SMOKE :-laf

 

[wtfd6]

installed my new vp44 and a new lift pump today. night and day difference. not sure if i can make it to the dyno day though. just figured out that i have a class on saturday, and a bunch of stuff on sunday. i am going to try to make it in between things though. hope to see you all this weekend sometime. mark

 

[I-6DZL]

Mark what's higher on your list of priorities???? A B. S. session with your fellow cummins buds, and not to mention a "few" cold ones. OR just some stupid class, i mean it's not like you're a gynecologist or anything, ahahaha.



Hope you can make it!!!!



I don't think we've broke 20 yet. I think alot of folks are gun shy about signing up, for some reason.



Actually, we've dropped 1. I will not be able to dyno as of right now.



Curtis

 

[PAddington]

I signed up, but not sure if I'm going to dyno yet. My truck is up and running from the transmission swap but not finished yet.



When is the cookout? I am going to try and show up sometime on Saturday, but it might be easier for me to make it Sunday.



Paul

 

[Lsfarm]

Stacks and Bars

I will be bringing my 'Display Stacks' with me, they are fully functional, and can be sold.

John, even though I've been under your truck, I can't remember if you have a stock 3" downpipe, or a 4" pipe. If you want this stack set give me a call.

248-390-5975

I'll be bringing two long bed and one short bed set of Ride-Control bars [traction bars] in black, red, chrome. Chrome is the 'Display Set' but can be sold.

I also plan on bringing 3k Governors spring sets, lifetime track bars, and ????



Anything else anyone can think of that I might have 'in stock' ??



Ryan [Cooker] you've got to get your priorities straightened out, what is more important, working and taking care of your customers, earning money, or going to hang with your diesel-smelling Buds and having a few beers?? What are ya trying to do, pay a few mortgage payments or something?? {just kidding Ryan] Hope to see ya Sunday.



For a stack install, I'll bring my hole saw, Curtis has his cordless drill, and cordless sawzall with steel-cutting blade. I'm not sure about John's current exhaust system, if it is going to take a lot of persuasion to remove?? Is there air available for air tools??



Post any items you may think of, no reason to bring an empty truck.



See Ya Saturday for sure, maybe Sunday too. Greg

 

[I-6DZL]

As Greg stated i do have a cordless sawzall, and drill, and they're both on charge as we speak.



Ryan i hope you can make it, haven't met ya yet.



Should i bring anything else ??

Greg what size socket does the Inj. pump take ? Can't remember.



Thanks

Curtis

 

[Lsfarm]

Socket size??

Socket: middle tool box, bottom drawer, third one from the left side, on rear rail of 1/2" drive sockets. ??? Don't know, but I'll look. You bringing your timing tools and barring tool?

Who's crawling on the gravel ?? I'm wearing my suit so I won't be tempted. LOL



See Ya, Greg

 

[Babyfat]

if we are tapping for etg's brian wants his tapped and plugged for now what size tap and plug? his is an 03 wants pre turbo



my down is four inch just bought cool duals last fall, nancy is not saying no to stacks but she hasn't said go either



TWO DAYS Oo.

 

[DGStrate]

Me too! Me too! - BUT - ???s

Hiya All!

I am still attending!! WooHoo!



Greg - Will be good to see you again!

(Maybe we can take the wife for a ride in your truck

to convince her to let me do the DTT!!)



All - Lookin' forward to meeting you!



I have the X-Monitor... They (BD) recommend using the pyro

included in the kit (usually for post-turbo) even if I want to

go pre-turbo... Anyone else do this? Any other recommendations

for a different sensor? What size tap?



Oh - so confused!!!



See you all there!



-Derek

 

[I-6DZL]

John i honestly don't know if we can tap the manifold with-out pulling the turbo. If memory serves me correctly you cannot. On my truck, and yours, just drill the manifold and use a pencil magnet to dig out the shavings.



I'll bring my dirty clothes and just as long as the ground isn't wet, will help install anything.



I will bring my timing tools, and barring tool. Hell i should have just left my whole tool box on the trailer and brought it over.



Curtis



O and John just get the stacks, it'll be ok

 

[Babyfat]

MARK WHAT CLASS DO YOU HAVE? FOR FFING? MAYBE I HAVE THE BOOK WE'LL HAVE CLASS FOR YOU



THIS COULD BE EXPEN$IVE WEEKEND

WHAT TIME PEOPLE GETTING THERE FRI?



I WORK SAT TIL 1:00 EVERYONE HAS TO COME OVER AND BUY A KUBOTA :-laf



DEREK YOU CAN DRIVE MINE IF GREGS NOT THERE, DTTS FOREVER Oo. :-laf

 

[I-6DZL]

John it's only money, just as long as it's rollin in, it'll roll out



I hope to be there around 6 or 7 to drop the camper off, then prolly back around 9 or 10.



Greg do you have a link i can pick up for dads truck ? How about a ez or comp i can throw on to see how he likes it ? early 00



Curtis

 

[powerwagon440]

what time is it supposed to start? i have a 2hr drive just want to get there before it all starts going!

 

[Lsfarm]

Stuff

I'm sorry Curtis, I'm fresh out of edge boxes, maybe we can pilfer one off someone's truck for your Dad to 'test drive' that ought to 'set the hook'.



I usual size for the pyro probe is 1/8th pipe. The 3rd gen's can be drilled with the turbo in place, just put grease on the drill bit and tap, and start the engine with the air inlet off the turbo to make sure it spins freely, I've done a few with no problems. The grease catches 99% of the chips.



Does this mean I have to clean and wash my truck tomorrow?? Never mind, I'm not going!! LOL



See ya Saturday Greg L

 

[I-6DZL]

Starting time!!!!!

WE WILL BE STARTING AT 8 AM sat. If people are there that is!!! Sunday around noon:30, 1pm. Can't start any earlier than that.

Lunch will probably be around 1 PM

Dinner whenever everyone is hungry again.



Everyone want to bring a cooler with ice, with beverages, and to keep food cold for everyone. I should have 1 or 2 with me (if i remember)



BLUE-BEAST bring your edge over before you take off, so i can borrow it until you get back My dad will be all :-laf



Everyone bringing something, refreshments and food.

John Hamburger

Me ketchup, mustard, relish, 2 packs of hotdog, hamburger buns, and some beer, a grill, and hotdogs, and chips

Ian Tables, FIREWOOD ? anything else i may have forgotten ?

Everyone else i think has pretty much chose around all these items, are bringing some killer (well not technically) passing dishes.....



What do you Saturday nighters think we should do sunday morning ?? Breakfast somewhere ? I've never tried frying eggs on a grill



I'll also have my timing tools, and Gregs expertise will be there. I will have my cordless sawzall, and Drill so we can install Stacks in Johns truck. I will also have my drill set so we can install Traction bars on anyones truck.



Man what a job... ...



Curtis



P. S. Does anyone want to volunteer to help strap the trucks down??? Not sure if dynoserve will have some extra help on hand or not... ... ... .

 

[IC Smoke]

wellInvasion TDR is comming to dynoserve. Ill be bringing the tables/firewood & cooler tomorrow evening around 6 with a package of hotdogs, buns (hamburger and hotdog)





DYNOSERVE WONT BE OPEN TILL 12 ON SUNDAY I think..... curtis. .



so Potters sunday morning? ahhahaha Im up for anything but remember 10+ diesel trucks pulling in might scare the elders on sunday morning



IF some of us get up that is... .



Ian

 

[wtfd6]

yes it is a firefighting class. we are having a live burn at Marad. it is a training center near toledo express airport. if we get out early enough i plan on come straight up from there for a little bit. i may not be in any condition for coming. im sure i will be sweating my @ss off. it is fun though. see you all later. mark