2nd Gen Non-Engine/Transmission Sacramento CA area shop for VP-44

[bnbrown]

It looks like I will be needing to find a shop to do a VP-44 on a 2002 2500 ETC, with a couple miles left before 100K. Any suggestions on a shop, one with a big "C" out front is prefered, or a dealer , (this should be a warranty item ) that is decent to work with?

 

[Forrest]

someone that works on them ... might be able to get you to the right place:





KEN IMLER DIESEL PERFORMANCE

2445 HARVARD STREET

SACRAMENTO, CA. 95815

1-916-920-3775

 

[OTRPU]

Thanks for posting this, God willin an the creek don't rise I should be a pulling into Sacramento, CA in about 6 days. Gotta get from Lakewood, CO to Bristol, IN to hook, then turn around and head for the wet country.



Cheers,

Steve J

 

[bnbrown]

I talked to the one dealer i have had good luck with here down south. . they said for the 100K motor warranty you have to take it to a dealer... but would still like suggestions on a shop in case of other issues after the 100K has past (only 650 miles from now)

thanks forrest, will note that location

 

[BKenny]

Yeah, Ken Imlers is a good shop i had gauges put in my truck there two weeks ago .

 

[TWilliams]

I am originally from near yosemite and both my dad I took our pickups to Collins Diesel in Stockton, CA. They are located off of I-5 and Charter Way easy on and off. Try them at (209) 948-4410 or 1-800-903-4373 ask for Lewis.

 

[BigBadDodge]

I too would recomend Ken, at Imler Diesel Performance, great folks to deal with. He will do you good.



BBD

 

[Ed]

Vp44

Richardson Dodge in Oakdale did my 99 when both the lift pump and VP44 went south. Both under warranty at 99+k. My brother's 02 was done there under warranty also.

Ed