Sagging Kore suspension-need measurements

[Big P]

I'm working with one of Kore's distributers on warranting my front coils. Could somebody with stock wheels and tires and stock suspension please measure the distance between the top of the front wheel and the top of the fender. I measured mine today with the Kore coils installed, and it's only 9 3/4"-10" with my stock wheels and tires on the truck. It was about 10 3/4"-11" when first installed.



Or, guys with Kore suspensions, could somebody measure between the front bumpstop and the axle? Thanks

 

[MartyK]

I have 3" from the top of the axle to the bottom of the Kore bump stop.



Marty

 

[Big P]

Thanks Marty!

 

[RHoppe]

BigP,



I see you have 18" rims,..... what make and style are they ?? How wide ??

Truck looks nice!! How do you like the KORE Pace ?? Are the front coils the VR coils ??? I've ran across another mention of coils sagging here on TDR.

What's the deal on this ???



Randall

 

[Big P]

1. Diamo 8 Karat

2. 9"

3. In my honest opinion, Kore is only worth it if you REALLY use/need the capability of their higher end systems. If you just want a small lift for looks, there is cheaper and just as good options out there.

4. No

5. Whats the deal? I don't know.

 

[RHoppe]

Thanks BigP !!!!



Randall

 

[MartyK]

BigP,



I was wondering, did Kore replace your springs? Did you get the same springs or the VR's? If so, what is your measurement from the top of the axle to the bottom of the Kore bump stop?



Thanks.