saw aluminum diamond plate rocker covers and i want 'em!!

[americana]

just saw a cummins ram with diamond plate rocker covers and i want 'em bad!! they look great! anyone know where to get 'em?

thanks

------------------
regards,

peter
1998 24v 4x4 QC, SLT, Sport, Leather, Linex, snug lid, center line wheels, Smittybilt side steps,color matched fender flares, stull grills, tow hooks----first diesel, dodge etc. i'm in love!

FREE CARL!!

 

[Loco-Motion]

Check out Dee Zee (deezee.com). I think I saw them there.

------------------
2001. 5/3500/SLT+/Patriot Blue/Q-cab/6x6/HO/6 speed/4:10 uncle-slip/Jakey brake/all options w/leather/Taylor Wing & tool box/VDO on the "A" pillar/Mag-Hytec/WAAG nerf's/Lund/
2000 33ft. Holiday Rambler 5th/Double slid/11,000lb.
( Bob Oakley, the bank's best friend)

 

[Walker]

I've got a set for my 96 sittin' in the garage for 4 years now (they are for a short box). Decided not to put em' on. Could let them go for a deal if your interested.

------------------
2001 2500 SLT QC 4x4 ETC 5spd LWB 3. 54 Black/Agate leather. DD2's w/boost module, DD4" exhaust, ISSpro boost/pyro gauges. Custom full bumper/brush guard and headache rack, Seal-Tite tool box, B&W turnover ball.

 

[americana]

nope... . deezee is polished stainless. i like the look of diamond plate much better.

walker... why don't you just rip my heart out with a spoon you warmed in your arm pit!!! i love a deal, especially when it's something i want. but i've got a long bed. can you tell me where you got 'em?

thanks, again

 

[americana]

gary... ... a diamond plate valve cover? #ad
i like it!! can you get right on that for me?

i am talking about the rocker panels that run along the lower edge of the fenders, doors and bed. sorry for the confusion.

 

[Walker]

I picked them up at a pick-up accessories shop in Waco, Tx. Can't remember the name or manufacturer. I've still got the original box, so I'll look and see if there's any info. insided or on the box itself.

 

[americana]

walker, i'd sure appreciate it. i tried calling a truck accessories shop in daly city and they don't carry any. i also checked with 4wheelparts and they didn't have anything either. so any help from anywhere is appreciated.

thanks

 

[Whitmore]

I would love to see a picture of these diamond plate rocker panels if someone could post them, thanks Kevin

 

[446]

I saw these on Fritz,s Ram page http://dodgeram.org/other_pages/s_belt/sbelt.html

#ad

 

[Walker]

That's exactly what I have (except for a club cab sb). And that's the picture of the truck that made me order them in the first place. Actually, I think I ordered mine from somewhere in AZ (not TX). It's been a while.

 

[Gary - K7GLD]

I thought you were talking abour rocker ARM covers for the ENGINE! #ad


The diamond plate covers for the edge of the BED and tailgate can be ordered from most Kragens, Pep Boys, etc... #ad


NOW, if you are talking about the ROCKER PANELS on the lower edges of the cab and bed, I'm REALLY lost!

------------------
http://community. webshots.com/user/davison71 Early '91 250, 727 AT, 307 rear... Banks Stinger exhaust, intercooler... US Gear OD... Tweaked pump, upgraded radiator... MORE than a match for every new PS Ford encountered so far...

"Dura" WHAT? NOW I know where all those recycled beer cans go...

 

[americana]

oh, yeah, baby that's what i'm talkin' 'bout!!!!! where do i get 'em. those look great!! walker... . it's killin' me you have 'em and they won't fit my truck. try puttin' 'em on our classifieds.

someone help! it's an affordable gotta have it!!

 

[americana]

well i checked the web under different variations of the name including ici and couldn't find anything. there are two listing in the yellow pages i'll try tomorrow am. i don't like the idea of rivets and think that 3m hi bond tape would do it. what do you guys think? if anyone beats me to it please post here.

 

[americana]

any news? haven't called the folks in phoenix yet.

 

[americana]

dee zee makes an aluminum set held on with tape. $120 not bad, down right cheap if you ask me. anyone know how tough it would be to trim the color matched fender flares to mount the set underneath the flares? could i do it carefully with my dremel?

 

[Hummin Cummins]

www.rjrproducts.com

 

[americana]

hummin cummins... .



the rjr stuff looks great. only thing is i want diamond plate all the way up to the bottom of the body trim line. i like rjr because they have a u-shaped piece of diamond plate that covers the bottom of the rocker panel under the doors. the ici covers don't have that.



now..... problem is... . i bought the ici covers... . haven't put them on yet and it would s*ck if rjr could do the ones i want. i am seriously broke with the new house and all... ...



i e-mailed rjr... . let's see what they say..... i see this thread costing me some money!!!

 

[BigBadDodge]

Neat stuff here

 

[americana]

bigbad... . yep checked them out too... love stainless steel, but like diamond plate lots better... .



hummin cummins... . just got an e-mail back from rjr... they are 2 5/8 inches below the trim line and they don't do custom work. they will get back to me with a price and i will post here... .