Scotty II hole saw

[Forrest]

Is it still floating around out there somewhere?



I'd like to get it ... if whoever can e-mail or PM me pls.





Thanks

 

[JohnMcIntyre]

Talk to Rod Snaith, WildCatDiesel

If you got your Scotty II from WildCatDiesel then Rod provides the Holesaw and drill arbor complete FOC the relevant website/contact details in my truck profile. I was not aware of another going the rounds?



Good luck - you won't be diappointed with the Scotty II

 

[Forrest]

Ok ... got the hole saw ... now just need the Scotty II to GET OFF BACKORDER

 

[CFAR]

Where did you get the hole saw from?

 

[mschoenheider]

I have the Scotty, but no hole saw, want to let me borrow it? I'll pay for shipping plus a few bucks for your trouble.

Mark

 

[Forrest]

Appreciate the responses ...



I have to return it to the owner & will let him PM you ... sorry ... I'm under oath.

 

[Diesel Dan]

I need the holw saw also.



If anyone has one for loan, I would appreciate it.



BTW

Scotty had 2 of them. Lent them out, Had a computer glitch and doesn't know who has them. And the culprits will not return them



Pass them around please



DD

 

[zonker]

Scotty 2 hole saw

What size is this hole saw? I have hole saws for door knobs and hardware, and dryer vents. Is this some oddball size you can't get at the lumber yard?

 

[GOTSOOT]

Scotty II hole

for those of you who do not have a 4" hole saw, another option is to make a template with the center marked-drill the center with the largest drill bit you have and get a pair of left or right sheet metal shears and go to it until you get close to the outside line that you marked at 4" s-- to close will bend or distort the sheet metal- now get a rotarty file and a die grinder and this will cut the sheet meatal like a hot knife in butter. You might try opening up the hole a little larger and taking a piece of fuel line and split it and push it on the sharp edge - killing two birds with one stone-covering the sharp edge and making a somewhat seal for the end of the Scotty! works for me

 

[Got Smoke?]

Re: Scotty II hole

Originally posted by gotsoot

for those of you who do not have a 4" hole saw, another option is to make a template with the center marked-drill the center with the largest drill bit you have and get a pair of left or right sheet metal shears and go to it until you get close to the outside line that you marked at 4" s-- to close will bend or distort the sheet metal- now get a rotarty file and a die grinder and this will cut the sheet meatal like a hot knife in butter. You might try opening up the hole a little larger and taking a piece of fuel line and split it and push it on the sharp edge - killing two birds with one stone-covering the sharp edge and making a somewhat seal for the end of the Scotty! works for me

Got soot the hole for the Scotty II is 4. 5"!

 

[pgleavitt]

I bought a 4. 5" holesaw from Grainger supply. Finished off the hole with a big truck tail light rubber grommet. Same ones found on semi trailers. Can be found at any truck stop. They fit perfectly and add a nice finished look.

 

[Mad Bomber]

Hole

Napa has the gromet also.

 

[Dkevdog]

Originally posted by Diesel Dan

I need the holw saw also.



If anyone has one for loan, I would appreciate it.



BTW

Scotty had 2 of them. Lent them out, Had a computer glitch and doesn't know who has them. And the culprits will not return them



Pass them around please



DD

Dan, I have at least one- I think I might have more. You can borrow one here at my work.



Kev

 

[Diesel Dan]

Thanks Kev,



I will send you a e-mail and maybe you can UPS it to me on my account.



I am waiting to install my Kwikspool HX-40 (Tuesday). And i need to determine if opening up the hole is necessary seeing as i don't tow anymore



Thanks for the offer and i will advise



DD