2nd Gen Non-Engine/Transmission Seat Swap, QC seat in Reg. Cab

[TWenske]

I am looking for a leather seat for a 97 Ram regular cab and found a set out of a 00 but it is a quad cab with the belts in the seat. I know it would look funny with 2 sets of seat belts but other than that will it fit? The seat backs look bigger and me being 6'5" I don't want them to hit the back of the cab too soon when reclining or something dumb like that. If anyone has ever tried this let me know.

Thanks,

Tim

 

[BigPapa]

Tim,



I haven't tried it myself but I can tell you this, the floor on the quad-cab is flat and the floor on the regular cab is higher in the back than the front. Look at your '97 and you'll see about a 5"-6" "step" at @ a 45* angle in the back of the cab.



Scott

 

[KevinSmith]

The seat may unbolt from the bracket. If so it may solve the floor hight issue. I don't know for sure if the seats have the same bolt pattern at the bracket or not.

 

[TWenske]

Thanks Guys.