2nd Gen Non-Engine/Transmission shed some light, truck wont start

[2ndgen2500]

installed sterio, now truck wont start!!!

today, installed a sterio system in my truck (infinitys had their day), i am having an issue now, the truck cranks, but wont run, seems to me like some sort of safe guard or security issue, maybe a fuse? i pulled the cables when i was working on it. but either way now the truck wont start, i am getting proper fuel pressure and etc but it just sounds like something is killing it, sensor, fuse, link. . i have no clue, help me solve this problem... is there a reset for the computer? i have left it unpluged for a while now...

 

[B.G. Smith]

Might be the security system, if you lock the doors with the remote whie inside the truck, then start, the system will shut it down. bg

 

[2ndgen2500]

tried while in the truck, no dice. i also noticed, my power locks dont work as well as keyless entry. i really am puzzled here this is the first time i have seen this. any insight?

 

[2ndgen2500]

bump

 

[B.G. Smith]

You may have disconnected something while installing the stereo system?? I think the security system comes through the central timer module as does the signal and 4-way flashers, do they still work? I think this would qualify as a 911 issue but might not get any more response than here? bg

 

[2ndgen2500]

i figured it out, seems some how the power door lock fuse got blown??? beyond me but replaced it, the doors work fine and after i got the truck to lock and unlock with the remote, everythign was back to normal.