Engine/Transmission (1994 - 1998) should I use a 3rd gauge?

[pwerwagn]

I Just ordered up my 2-50psi isspro gauge to replace my 0-30 banks. I also have the matching isspro pyro. I cant decide whether to just get a 2 gauge pillar or get a 3 with another gauge.

Here are my choices:

fuel pressure, oil pressure, or water temp as the third gauge.

should I spend the 50-100$ for one of these gauges, or just stick with the pyro/boost and a 2 gauge pod.

what do you all think?

 

[ndurbin]

I'd stick w/ just a 2 guage pod.



Nathan

 

[PUMPERDUDE]

Some will say it is not needed on the 12 valve :-{} but I like having a fuel pressure gauge. It lets you know if your P-7100 is getting fed properly

 

[tURBOdIEZEl]

ive also got a fuel pres. gauge. L/P failure in a 12v is no where near the frequency of a 24V, even though at 1/2 throttle it pegs out at 30. lol

 

[SEmerson]

I run FP on both of mine. And would do the same again.

 

[pwerwagn]

Thanks for the input guys.

I'll see how much I can get a isspro FP gauge for, then make my decision!