skyjacker

[Jerry R]

Anyone using the skyjacker 2. 5" lift?

I am about to purchase a truck from the dealer and I see they send out to a shop that uses it. Am I better off with just the 2" spacer?

I like the fact it comes with shocks and overloads. Thank you.

 

[StephenThomas]

Very Interested....

I'm very interested about this topic as well. Don't have an answer for ya, but i'm posting this in hopes that you'll share what you decide on and how ya like/dislike it when the time comes.

 

[Pirate4x4]

My buddy has a '01 with a 6" Skyjacker kit and 37" BFG Krawlers on it. The kit is a nicely made kit, and the truck drives well even towing 8000lbs.

 

[fozzy]

I had the Skyjacker kit on my 2nd Gen trucks and loved the new spring rate Skyjacker used. It rode better than the stock springs. The kit is well built. Waiting for them to make a six inch for the 3rd Gen trucks. Good luck, you can't go wrong with Skyjacker kits.

 

[CIverson]

I put in the D25 coils a few months ago, and they are a little stiffer than the factory springs, mine were the snow plow prep ones too.

 

[rbattelle]

Does anyone out there happen to have pics of a Dodge (2nd or 3rd gen) with the 4 inch kit on it? I think that's the one I want, but I want to see if it's too tall...

 

[Lou M.]

I have the 2. 5" coil lift kit. I didn't lift the rear though. The truck sits level without the rear kit. The springs ride better than stock and they look good to boot! I havn't had any problems with the kit so far. I think you will be happy with the lift kit. I have pics in the readers rigs if you wanna see the kit installed. Good luck.



Lou

 

[Jerry R]

Thanks Lou!!! Your truck is awesome!