Smarty CR software updates

[Bob Wagner]

are now ready for downloading



http://www.madselectronics.com/DownloadS04A.html







Thank you for your patience

 

[Big P]

Downloading now!

 

[Bob Wagner]

Thank you Mark

 

[Big P]

No... ... ... . thank you! :-laf

 

[Jeff_K]

Sweet! Got the new updates and have updated the Smarty already... . no out for some testing. Thanks Marco

 

[Sled Dog]

No... ... ... . thank you! :-laf

DITTO!! :-laf

 

[driverno8]

So do you think they'll fix my timing problem?

 

[DGStrate]

The original SMARTY programming

are now ready for downloading



http://www.madselectronics.com/DownloadS04A.html







Thank you for your patience

Bob,



Which one of those is the one that comes standard on the SMARTY when it is shipped?



And ...



If none of them are, can Marco put the original tune out there for the guys that have the units, have downloaded one (or more) of the updates and want to go back to the original programming within the SMARTY unit?



Just asking for the community, here...



Thanks!



EDIT: Bob - never mind the question - I see now on the MAD's web site that the Moderate torque management increase has a note after it that says: (standard Smarty software). I did not scroll down far enough. Sorry.

 

[GWoody]

Hey Bob or Marco, any idea on more top end power and rpms????

 

[Lightman]

are now ready for downloading



http://www.madselectronics.com/DownloadS04A.html







Thank you for your patience

Downloaded the middle program now I get internal error 2 and smarty wont work to up date the ECM

 

[JeffKing]

Same thing here with both the stock TM and middle TM. Will try the original TM and see if that will work.

 

[driverno8]

Don't feel bad guys. I'm on a MAC and the drivers don't work. I can't even update it.

 

[JeffKing]

I have tried all three update in the following order 202, 102, and 302. I get the internal error 2 for all three updates.



First thing I did was load the STOCK program back on my truck and then I updated the smarty box and now non of the software updates work.

 

[Marco]

Sorry!!!

I have tried all three update in the following order 202, 102, and 302. I get the internal error 2 for all three updates.

Guy's,



I musta have been brain dead this morning! Twas about 1 AM when I published the updates... . I've forgotten to update one of Smarty's security protections against wrong/corrupted downloads! ARGH!



Internal Error 2 = Smarty checks if the software he should download into the ECM is really what the truck needs. I didn't update that table... .



Can you forgive me? Pleeeze? :{



Good news is, no damage done! Please update your Smarty one more time, voilà ..... I've just published the corrected updates.



Sorry for the inconvenience!



Marco

 

[JeffKing]

Marco, the 302 update . zip file is corrupt. I have tried downloading it four times and each time it is identified as corrupt.

 

[WCPoe]

3_02 won't unzip. Is the 2_02 the lower smoke file?

JeffKing - I downloaded the 3_02 file Ok but the extract process tells me no files to extract, yet there's 14. 3 meg showing. I'm sure Bob or Marco will get this corrected shortly. Is the 2_02 file the one we should pick for lower smoke???

 

[Marco]

JeffKing,

Thanks for the heads up!

Wassup today? Grrrrrrr...



I'm uploading the file 302 again right now.

Let me see if it downwloads now correctly.

 

[Marco]

File 302 is uploaded again

I've tried to download and extract it, works!



WHAT A DAY! LOL



WCPoe,

Most likely you were downloading while I was uploading the new file, thus the no go.



Please let me know if it works for you too now.



Thanks!



Marco

P. S. On edit, yes #2 is the one that cuts smoke!

 

[WCPoe]

Thanks Marco

Marco - Thanks - When you get some time, give us a little description of what each of the software versions provide. I'm getting ready to load the 2_02 program on my truck. Oo.

 

[WCPoe]

Smarty ver 3_02 downloaded aand extracted OK

Thanks again Marco. The 3_02 zipped file downloaded and then extracted fine. I'll go load the 2_02 on my truck shortly and give it a try. Bill