Smarty POD

[Hawk]

What are you guys running for settings on the smarty? I am looking for a starting point as I'm not banking in the time department. I get home and then 2 days later I head to Ohio pulling my box.



I was going to start on 3 with timing but I don't know if that will work or not. The truck will have Banks dual exhaust on it and a drop in filiment.



Any and all inputs are welcomed.



Thanks in advance

 

[Bob4x4]

The power level you can safely use starts out with how much transmission you have (or clutch if you are manual equipped)

 

[Hawk]

Its a manual. I have a South Bend twin disc that needs to be exchanged for the new truck. I bought it last year for the 03. To bad they aren't the same. I plan on stopping by the store on the way back to AZ to exchange it though.

 

[subodh]

dont forget that you can get your stock turbo pretty hot i think that was what i broke mine hig egts

i have a 05 auto and on the dyno i got 429rwhp with just smarty and cat removed.

now i have changed turbo and got x2 the pressure but havent had time to dyno jet

also last night i installed my 100hp injectors and smarty sw3 is now stornger than ive ever felt

in my truck. but when it was stock i was always on sw3 or sw5 (1-3 about same milage and 5 may was a bit less mpg but alot more fun when someone tried to cut you of while cruising on highway)

torque management om 2 or maby 3 and then timing on 2. . if you dear and have good pump/injectors put up the rp too