Engine/Transmission (1994 - 1998) smoke

[KCraft]

how is do i get my 12v to smoke? i want more power. Oo. my buddy ground out the holes for my plate and slid it forward which helped out a lil but stil no smoke. :{

 

[1965LONEWOLF]

Put The Fuel To Her .

 

[Vaughn MacKenzie]

Maybe you got a clogged fuel filter, faulty AFC or weak overflow valve not letting it get full fuel. With the plate ground and forward you should be getting some smoke.

 

[GDMRTN]

Allen head plug on top of the aneroid. Take it off and rotate the little clicker wheel clockwise. Turn it until the spring inside just so gets loose. Then go see smoke.

 

[Fordiesel69]

#5 plate and a set of 370's will get you some smoke.

 

[highmilage94]

Inside the housing you took off to get to the fuel plate, there is a little 'J' hook, take that off. Simply take out the small bolt at the end of the shaft, pull out the pin, remove the 'J' hook and re-install everything the way it was. MAKE FUEL PLATE STRAIGHT LIKE THIS ________________________________

 

[KCraft]

thx yall im gonna replace the fuel filter later this week. ill try the j hook idea. what could be wrong with the afc? already clicked the wheel!

 

[highmilage94]

Also Git Urself A Set Of 191 Dv's!!! I Have A 94 So I"m In The Same Boat As You!!!!!!!



My truck just dyno'd 320 rwhp and 705 rwtq with all stock internals except for pump and injectors. 15* of timing 275 hp rv injectors, 42 p. s. i. stock turbo. 280,000 miles