Engine/Transmission (1998.5 - 2002) SNOW's water/methanol kit

[rivercat]

Anyone running this kit wanna share some input on it seems like a sound idea but not sure it is benifitial for trucks that are not heavily fueled.

 

[rivercat]

guess noone runs this kit

 

[PC12Driver]

Have you tried a search? Plenty of info has already been covered.

 

[Jim Fulmer]

guess no one runs this kit



Been running it for 1. 5 years now... ... works great!



Jim

 

[Cooker]

Have you tried a search? Plenty of info has already been covered.

I agree a search will turn up a ton of reading.

 

[PHellen]

Running the stage 2 Kit with the Variable Controller. Runs Great with 50/50 Havn't used it yet for towing b/c i blew my headgasket. When it's on you can feel it kick in for sure. Take Fulmer's Advice and mine. Good kit, well put together and easy to install.

 

[Beast2B]

i don't run the kit, but i've heard plenty of times to keep it under 20% meth unless you have studs and superior HG. find member Winspeed for a couple of quickly blown HG!

 

[PHellen]

I Heard Winspeed (Adam) Blew his 2nd HG because the Torque Specs That Came With the Arp Stud Kit Was Wrong. Otherwise Shouldn't of happened the 2nd time. But as far as running the stock headgasket and no studs yes i think beast is right keep the meth down and have the injection come in 10 psi before full boost 2nd at max. If you Tow I would Just have the 1st stage come on at 15 under Full Boost and max the stage 2 on the controller to boost you can't make that way the 2nd stage woun't come on. Heres a picture of what happened to my headgasket 52 pounds with 50/50 meth. #ad

 

[Jim Fulmer]

I ran a 50/50 mix at 60-80 psi with a single O-Ring(head) and 12mm studs... ... ... . zero problems for 2 years... . FYI!



Jim

 

[PHellen]

Jim Thats what i'm getting done is o-ringing the head with Arp 12mm Studs. So I'll be good to go. :-laf

 

[rivercat]

sorry to bore you guy a search turned up lots of old threads to look at



thanks for the updated info though