Engine/Transmission (1998.5 - 2002) Socket Size For Map Sensor

[TerryWilson]

Could someone please tell me the socket size for the MAP (Turbo boost sensor) located next to the IAT sensor on the drivers side of engine near the back. I guess it about 29 mm or so? These old eyes will not look around corners while upside down anymore. At NAPA prices I hope to not buy several sockets to find the correct one... . Still having no power to a point it will not go up hills at all. Previously replaced the lift pump with a new Glacier pump system and have 10 psi on fuel pressure gauge even at WOT. Thanks a bunch!

 

[jwilliams3]

32mm as I remember.

 

[Cliffman]

Can anyone confirm this? Is it a 32mm/1 1/4 deep socket? The replacment is 1 1/16

 

[SnoKing]

Just walked out to the trucks tool box. I bought a 32MM in Taos, NM a couple years ago to check the MAP on my 2001. 5. That's what fit it for that year stock MAP. SNOKING

 

[Cliffman]

Great... Thanks for confirming.

 

[Bob4x4]

Some year sensors have been superceded and need a jumper harness to connect up but I don't remember sizes off hand

 

[hsmith]

1 5/16 will work. Has to be deep.