Sound dampening.....

[Devildog]

I Know it has been discussed before, I couldn't find the thread, but the question is for those who had installed some.

1, How hard is it to remove the back seat?

2, Should I remove the front seat and carpet and do the whole floor as far up the fire wall as possible, or, will doing just the back wall and floor up to the back seat be good enough?

3, How long did it take? thanks.

 

[John]

Originally posted by Devildog

1, How hard is it to remove the back seat?



(A) Not too hard... but kind of a PIA. BTW, I used at least two layers of Dynamat Xtreme on the back cab wall with Dynamat Hood Liner on top of that! Talk about superior sound deadening!





2, Should I remove the front seat and carpet and do the whole floor as far up the fire wall as possible, or, will doing just the back wall and floor up to the back seat be good enough?



(A) I also used at least two layers of Dynamat Xtreme under the OE carpet/sound deadening material from beneath the front seats as far up the firewall as I could get.





3, How long did it take? thanks.



(A) It really depends on three different things:



1) how comprehensive do you want to make this project?



2) how much do you want to spend



and 3) how anal are you about making this a quality installation/upgrade.