SouthBend is A #1

[BPINE]

Just wanted to give credit where credit is due!!!!!! Thanks to Peter at SouthBend Clutch I have a happy customer, while doing a clutch install I discovered a problem, the starter spacer had been removed by the previous installer and not given to the customer and Peter offered to send me one next day air so I could get the job done. He also sent me a part I damaged from a case of fumble fingers and all at no charge NOW THAT IS CUSTOMER SERVICE!! I still wouldn't recommend droping things to find out Peter is an all right guy just take my word for it. Thanks again Peter the Clutch works perfect. 2001 Con FE

 

[csutton7]

bpine--glad to here ya got her put back together--thanks goes big time to Peter--now for dropping things--ya know a coating of diesel will prevent anything from slippin out of the ol' clampers--just a reminder not to be working on these trucks without dippin' into the sauce--he,he,he---chris

 

[drawson]

I have got to jump in here. The service and help I have gotten from South Bend is A#1. Peter is one great guy and the time spent with me on the phone and e-mails tell the tell. There service ranks right there with Dillon reloading company.

<font color = blue><font size = 20>BIG THANKS</font></font size>

------------------
EAT'M UP
97 2500 Club 4X4 3. 54, Forrest Green/Driftwood, LSD 5 speed, & Psychotty Air System, TST #11, 370 HP injectors, timing at 16 deg. , 16CM2 housing, AFC spring kit, TST EGT gauge & 0-60 boost gauge in A Pillar, Cat-be-gone, 4" Dynomax Bullet muffler, Crome 4" turn down, 3 Electric Fans, One inside, One in front of A/C, One in front of intercooler, AmsOil Through out, Geno's trans filter kit, AmsOil Bypass system, Lund Winter front, Leer Cab Level Shell Driftwood , 255/85R16, South Bend's Hypo Clutch*NRA/USPSA member and proud of it*



[This message has been edited by drawson (edited 05-31-2001). ]

 

[Cliffman]

Couldn't have said it better my self. But I'll say it anyway. A BIG THANKS To Peter at SouthBend Clutch. Helped us avoid a real nasty situation. So far this clutch is Awesome #ad
#ad
I'll change my sig later #ad


------------------
2001 Driftwood 3500 Quad Cab 4x4, Long Bed, 5. 9L HO Cummins Diesel (ETH), 6-Speed HD Manual (DEE) Loven the shift thing (Arrrrrh), 3:54, SLT+, 3. 54 Anti-Spin Axle, Camper Special Group, Trailer Tow Group, 18,000 LB 5th Wheel Hitch, Leather, Sliding Rear Window, BDs E-Brake, Rhino Liner (gray), Velvet ride shackles, cup smoothy, Power Edge box / EZ Box w/elbo, DD Stage III injectors, McLeod Dual Disk Clutch, K&N, SPA Gauges, Jardine Exhaust, 16cm turbo housing. Love the smell of diesel in the morning. Hope your watchen DC cuz every thing you see here is a big lie, Hehe.

 

[South Bend Clutch]

I just want to say thanks for the kind words. The Dodge Turbo Diesel owners are a great group of people to do business with. One heck of alot better then the other diesel group. LOL If there is anything we can do, don't be afraid to ask. Peter

 

[Brandon]

Well here is the official towing report on the... ... ... ... ... ... ... ... .



southbend con FE



01 eth-----------sbc con fe, PE-EZ, DDIII, PSA, 4inch jardine, and a BD 4-inch brake... ... ... .





Peter we have put about 1000 miles on the clutch and it gets better and better every day... ... ... ... . Also starting off in 1st and reverse with a trailer is goood, no problems no chatter





I am yelling now,



IF ANYONE IS SITTING ON THE FENCE, THE SBC IS A DARN GOOD CLUTCH AND WILL TOW BIG TRAILERS WITH LOTS OF HORSE POWER... ... ... ... ... ... ..... THIS CLUTCH RULES





THANKS PETER BRANDON

 

[MCrossley]

BPINE your in the wrong valved group J/K Even though I am a shiftless type if I ever go for the stick Peter definatly gets my vote, very nice and knowledgable guy.

 

[Kraut67M]

Mr Southbendclutch,(Peter)

Is it possible to get a quote on a complete clutch set. I may have to get some 6speed rework done before my warrantee expires and would like to be prepared. Perhaps I can get the dealer to install new clutch at a substantial labor discount. An email would be OK

Thanks,

Kraut