Sport Headlight Wiring HELP!

[Fishin Guide]

Ok,



I know this has been covered in the past and after wading through all the posts, I have come to you.



I would like any links, diagrams, suggestion or tips on wiring up my sport headlights. Also, what configuration works best? All filiments on low? On high?



I do not want to blind folks on low beam, but I need some help for the black, wet, non-reflective roads of the NW.



Thanks in advance and sorry for the inconvienance.



Dave

 

[Cooker]

What year is your truck? I may have some diagrams and info I can send you.

 

[Fishin Guide]

Sorry Cooker,



I guess it's hard for you folks to help me out if I don't give you enough info.



Basics are '02 SLT 4x4.



I know I have a negative ground system. I would really appreciate the help and insight!



Dave

 

[Cooker]

Sorry the info I have is for older model year trucks. Best of luck.

 

[Fishin Guide]

TTT

 

[tntway]

Dave--sit tight if you can... . my puter with the instructions is down until maybe Jan 2. i will ship them to you as soon as i can, just pm me your email addy. not a difficult task to do ... just a bit time consuming--the wiring that is

 

[Fishin Guide]

Thanks tntway,



you have a PM.



Dave Oo.

 

[Fishin Guide]

Over 200 looks and noone has any help? There's gotta be a few folks with this in thier pocket.



Any and all help is appreciated.



Dave

 

[daveshoe]

Originally posted by Fishin Guide

Over 200 looks and noone has any help? There's gotta be a few folks with this in thier pocket.



Any and all help is appreciated.



Dave

We're lookin ' because we want to know how also

 

[tntway]

as i have previously stated... ... . the puter that had my directions on it is down until 2Jan or so... ... . i will post the WHOLE set on here WHEN it is back up.

 

[Thomas]

Dave - PM me with an email address that can handle a 1. 6MB attachment.

 

[Fishin Guide]

Thanks Thomas,



You have a PM.



Dave

 

[Fishin Guide]

A big Thank-You!

I justed wanted to thank Thomas for getting me the info I needed to get this project done.



I now have an excellant schematic to work from and the little parts are on order.



I appreciate the others that tried to help.



Thanks again Thomas! You just made my membership fee worthwhile!!



Dave