sps 66 on top of ht3b-26

[BradyWilliams]

RE: Super Phat Shaft 66/64/62

The posts that I have made was to reaffirm that a 62 would be a good match with a HT3B as the big charger with the right air flows of course. To say that a Super Phat Shaft turbo is the same frame size as a HT3B would be untrue. However as we have done testing on our products we have been able to install comp. wheels and turbine wheels used in both K31 and S400 turbos. It certainly comes down to which wheels in what turbos. We could help any one with turbo matching if interested. Thanks

 

[CRoth - BD-Power]

The posts that I have made was to reaffirm that a 62 would be a good match with a HT3B as the big charger with the right air flows of course. To say that a Super Phat Shaft turbo is the same frame size as a HT3B would be untrue. However as we have done testing on our products we have been able to install comp. wheels and turbine wheels used in both K31 and S400 turbos. It certainly comes down to which wheels in what turbos. We could help any one with turbo matching if interested. Thanks

The BHT3B flows around 88lbs/min. A good match would be something that flows around 50-65 lbs/min. Depending on the map of course.