Here I am

SS Mallory BHAF Mounts

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Firestik Fender Mount Noise

Edge EZ on ETH

Status
Not open for further replies.
the old stuff

Jason and all,



Installed the air filter(blew the money for the marine grade fleetguard) and the mount looks great.



In addition, I have a reverberating sound coming from the turbo, mainly during shifting, (up or down on manual 6spd) that occurs only when hot. When pulling loads or spooling when going up hills the sound is absent. I had this sound with the stock intake, and the dealer said it was cause I modified the air box. (I made it look like swiss cheeze to decrease air restriction).

The reason for this post is, I want the dealer to fix the turbo, but cant get past the damn air box, so if any of you guys out there want to get rid of your old stock air box, contact me @



-- email address removed -- or

-- email address removed --.



thanx again!
 
Last edited by a moderator:
George 00,



I shipped your mount on the 12, I will get the tracking number for you you. It should be there today.



DAZ,



Send me an email with your real name, somtimes hard to tell between tdr names and real names.



Thanks,



jason
 
IT CAME!

Dale stopped by today in the big brown truck... At least he said his name was Dale, sure didn't look like Dale... . Anyhow, The mount is here and it looks great! Can't wait to get home in the dry to put her on.

Thanks!Oo. Oo.
 
mount

Yea Baby, It came on the 19th jason what a fine piece of craftmanship. it's started to rain this morning and there calling winter weather condition here, doesn't look like i'll get in today. I also showed my buddy today and I think he now what one, do you have any left or will you be making anymore. Man I can't get over this thing it looks great. My brother was telling a friend about the mods I've been doing to my truck and his friend said that should of bought a fhod, I told my brother you tell him I'll run circle around him when I get done. Man that a nice looking mount Jason. Thanks Buzzy:D :D
 
Hi All,



The 2nd order is complete and they will be going out to new homes all threw next week.



I ended up with 3 extras so if any of you missed out on the 2nd order here is your chance... :D





Email: -- email address removed --
 
Last edited by a moderator:
Received and mounted

Jason:



I'll join the band-wagon and thank you for a great mount; pleasure to do business with you. My BHAF was on the truck 15 minutes later (quick and painless install)

That filter is huge :eek: :D
 
BHAF mount

Jason,



I just sent you an e-mail. DO you have any left? I count one! Please e-mail me with you address and I will send you a check.



Thanks,

Ed



-- email address removed --
 
Last edited by a moderator:
BHAF Mount

Got mine yesterday- Idaho is a long way from Virginia- went in OK- the stock air box mounting is plastic crap and two of them "stripped" but it went in OK and looks and sounds great- not much louder than stock box with K&N good turbo sound- thanks for a great mod- now to change sig and order Outerwears cover
 
Last edited:
SS Mallory Mount

Jason got mount last week and put it on right away it's awsome. Instead of the strap you sent I drilled the upright at the top and used a bungee strap to the inside of the fender. Stiffens the mount and holds down the BHAF. Nice job Thanx
 
Re: SS Mallory Mount

Originally posted by dezeldog

Jason got mount last week and put it on right away it's awsome. Instead of the strap you sent I drilled the upright at the top and used a bungee strap to the inside of the fender. Stiffens the mount and holds down the BHAF. Nice job Thanx
 
:p OK OK OK OK You guys are tooo much. I'm still getting orders so ya know waht that means.



I'm taking names for another order of 25. Now i need a full 25 orders to make the order so, email me at : -- email address removed --

Now ordering 1 means you will be waiting untill i have a full 25 to make the order witch might take a week or so to do, so be patient. I allready have like 8 new orders so it shouldnt take too long.

Oo. Thanks Guys
 
Last edited by a moderator:
Just a hint-



The stock airbox bolts suck- it would tighten and then it would loosen itself becuse of the weight of the mount. So I just went and bought washers and nuts and tightened it down that way. I tried to use the rubbers but could not and it seems to be fine after a week(no movement at all)Oo.
 
Status
Not open for further replies.
Back
Top