Here I am

St.Louis dyno day Nov 7

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Kansas City Area Dyno!

Any interest in a RMTDR Ranch Hand group buy?

you bet

Sure only because I have to make more power then Dave and the "old use to be" BIG RED TRUCK... ... . :D Sorry Dave. couldn't help myself
 
I'll be there ... . life is good ... turbolcc ... . I'll send a note out to the Gateway Chapter ... .



Life is good!



Keith
 
I am going to TRY and make it out there, I am hoping to come out sat. with Floor It and maybe dyno on sun. but I am not sure yet. I have to figure out finances first. So I will try, not to mention I gotta get out there and have a beer with Travis since things didnt work out when they came this way a while back.



Russell
 
Most of that power was just laying there in smoke :D When we used a little shot of nitrous from 1900 rpm to 2300 rpm and then shut it off so we could try and spool the turbo up. That 591 was on pure #2 only. This time I'm gonna put a bigger solinoid on it with a much bigger jet and this time leave it on through the whole run! :eek:



John
 
i'm sure hoping to have my TST back on for the dyno day, It is being re-programed right now...



Should have the miss gone and the power curve smoother too... COME ON UPS - get me my BOX!!!!



cya all there!!!!
 
J, 44 to 141 to 30 is probably your best bet. Don't forget that Highway 30 is also Gravois Rd. I think we are going to try and bar-b-Q, but I am not sure. As for breakfast, I can't think of any really out of this world places around there except for your every day places. See you there. Bring your camera, maybe it is about time for another one of those cool videos. Oo.
 
jlipskoc said:
Tomey, did you get your box yet? Hope you get it by sunday!

John



Thanks Travis for the Hwy and food info...



Yep, need another video... real soon ;)



Yep, sure did!!!!

And it off the UPS truck at 10:25am, and I was popping the hood at 10:27am...



The truck fired up with tst power at exactly 10:48am --- a new record time!!

I have installed-uninstalled so many times, I am a pro at that cam-sensor



BTW - the box feels SOOOO much smoother, and NO codes or CEL, and the decel miss or "knock" is gone, i am primed and ready to go for sunday !!!!
 
I would like to thank you guys for helping make the dyno day a success. It was a good to meet many of you. We had a great turn out and hopefully we can do it again.



here are the number for the day:



Dean Pruitt 02 PSD

370 689

404 723



Kenney Pollman 04 Dodge

276 553

354 704



Lucas Jones 03 Dodge

389 735

399 828



David Lange 01 Dodge

531 885

547 891

540 901



Travis G 97 Dodge

blown turbo



Dan Williams 04 Dodge

256 473

333 629



Tom Chaney 03 Dodge

318 746

196 381



Darrel Strubberg 93 Dodge

318 674

315 663



Dan Lampkin 96 Dodge

266 642

343 846



Jerry Mathieson 04 PSD

269 393

277 409

286 412



Chris Williams 02 Dodge

478 991

480 991



Donny Whited 03 Dodge

338 840

317 720



John L 94 Dodge

384 846

389 857



Terry Swisshelm 97 PSD

320 605

324 620



Mike Coleman 99 Dodge

470 no reading

465 997

467 998



Cletus Rademacher 04 PSD

406 727

399 748

388 715

387 713



Tod Parsons 97 PSD

219 393

224 410



Colin Besse 01 Dodge

398 957

394 943



Sean Niebaum 02 Dodge

333 690

430 964



Christian Gerber 02 Dodge

357 619

414 905



Eric Jahnsen 00 Dodge

435 857

437 853



Mike Spurgeon 01 Chevy

350 599

425 805



Jeff Jahnsen 01 Dodge

449 744

458 767

471 873



John Isaacs 03 Dodge

659 1197

555 1106



Ray Gulet 02 Dodge

528 1025

528 1006

526 895

548 1049



Kurt Birke 02 Dodge

381 892

379 905



Chris Gencola 02 Dodge

285 622

286 621

324 764



Dave Morris 04 Dodge

315 623

318 627



Rod Rouse 04 PSD

367 602

366 622



Lee Thurman 03 Dodge

369 664

318 697

395 682



Zack Johnson 03 Dodge

344 610

373 809



Keith Summers 03 Dodge

373 784

381 802
 
Last edited:
Back
Top