Stability control light on - no cruise control.

[Sticks]

Yesterday my 2014 3500 Stability Control Light in the tach came on and stayed on.

Still flashes when I spin the wheels in dirt, the SCS off works, but no cruise control (really annoying) and possibly ABS inop, but I have not tested that one.

Nothing shows up as an error with a generic scantool.

Spoke to a dealer and they think it might be a speed sensor out.

Thoughts? This makes 3 warranty issues that need addressed, so time to schedule with a dealer (current wait times are 1.5 weeks). I just don't want to find out it's a blown fuse, and I have no clue what they call the system in Ram Speak on the PDC.

Down side is my '02 needs the darn TPS replaced and the top turbo rebuilt, and I have not gotten around to doing that yet. I hate working 14 hours, 7 days.

 

[Ram4Sam]

There is a recall/Tsb out for the ABS system they just did earlier this week on my truck, along with a TSB #18-053-14.

Sam

 

[Bob4x4]

There is a recall for flashing the abs module p26 it is for 13/14;s The Anti-Lock Brake System (ABS) module on about 176,500 of the above
vehicles may contain software that causes an intermittent loss of the speedometer,
Electronic Stability Control (ESC) and/or Anti-Lock Brake System (ABS).
The good part is no parts are required so it should be quick and easy to get done.The actual flash time is less than 15 minutes.Your actual time will depend on the dealers scheduling and way of doing things

 

[Sticks]

It'll be a 2 day event.

I have a mystery coolant leak (I can smell it, just can't find it), the SCS, and an odd noise from the trans when shift into drive but keeping the brakes on (sounds like a TQ bolt rubbing - just not as aggressive)

Thanks for the responses guys. Hopefully my SCS is just a flash and I'll get my cruise control back.