Stacks

[Frank J. Lloyd]

Does anyone have pictures of how the stacks come up other than through the bed. I have an 11' flatbed that I need all the space for cargo and can't have the heat, there is room between the edge of my flatbed and the cab of the truck but I would have to come outside the frame somehow. Any suggestions, and does anyone run mufflers with a single or dual stack setup?

------------------
2001 3500 4x4 H. O. 6 speed 4. 10, SLT, Cab and Chassis, 163" wheelbase western hauler stake bed 3" straight pipe, silencer ring AWOL, boost pyro gauge, K&N, ready to bomb
Big Red is ready to roll!

 

[SmokinJoe]

Originally posted by Frank J. Lloyd:
Does anyone have pictures of how the stacks come up other than through the bed.

I too would like to see how stacks work on Dodge trucks...


------------------
2001. 5 QC 2500 White Sport 4x4 LWB ETC 5-Speed Anti-Spin 3. 54 Trailer Tow 241HD SLT+ Tan Leather(Mad Cow Disease) LT265/75R16E

 

[Koa Man]

Here is mine:
#ad

#ad


------------------
1996 3500 Clubcab SLT, auto, 4. 10 limited-slip, TST #5, 370s, AFC spring kit, Psychotty, Dunrite converter, Trans-Go, DiPricol EGT, boost & trans temp. gauges, 9 ft. aluminum flatbed and tool boxes with Venco dump. Custom front bumper, Hadley air horn, PowerVision mirrors & 4" Stack Exhaust.

 

[Frank J. Lloyd]

Nice bumper and grill guard, where did they come from? I ended up routing my stack about like you did.

------------------
2001 3500 4x4 H. O. 6 speed 4. 10, SLT, Cab and Chassis, 163" wheelbase western hauler stake bed, silencer ring AWOL, boost & pyro gauge, K&N, Geno's one touch oil valve, Cobra 29 bombed, Halogen backup lights, cargo bed loading area flood lights, 6" driving lights, underbed boxes, pacbrake, 5" stack and exhaust, straight!
ready to bomb
Big Red is ready to roll!

 

[EMDDIESEL]

Anybody running dual stacks on a 2500?

 

[Koa Man]

Took a pix of the Prozap bumper and welding shop that made my aluminum bed also did the bumper. Paid $500 for material, labor and installation. Welder wanted to make the bumper out of aluminum, which in hind sight I should have done. Elected to use steel because I was going to put a receiver hitch on it then decided I didn't need it. Anyway it is real strong, took out couple of rocks from a rock wall while making a real tight turn. Bumper only had scratched paint which a spray can of gloss black took care of.

 

[mbrolin]

I sure would like a set but I think my wife would draw the line putting a set on. Ummm Better start persuading her.

------------------
2001 HO 6spd,Quad cab,LWB,4x4,Flame Red,all options except for leather,Westin Brushguard/Push bar,Painless wiring,Radio Shack CB,my own design CB mount,Smittybuilt nerf bars,NW Custom rocker covers,Custom built stainless rocker light bars,DeeZee bedrails,Isspro pyro and boost gauges,Jacobs ebrake,Reese 20k 5er hitch(more to come)

 

[KWIKKURT]

Good lookin stacks... . On my 2500 I plan on coming up thru the bed. . Does anyone have any pics? Thx Kurt

------------------
"Have you driven OVER a phord lately"
2001 2500 BRT WHT SPORT QUADCAB 4X4 ETH 3. 54LSD TRLR CMPR PKG ALL OPT XCPT LTHR

 

[Todd T]

there is a member on here called BIG DQ he has some very nicely done stacks throught the bed on his 2500. he went past them on the inside of the frame and then over te top of the frame and back to the stacks with 4" flex pipe. they are nice #ad



but dont call them stacks, he reffers to them as "COOLING TOWERS" #ad



------------------
Todd,
2001 Q-cab SB 4x4 5spd 3. 55's,PowerMax3 adj. , A pillar Boost/EGT,4" turboback exhaust,custom built aluminum airbox W/K&N-RE0860 through the cowl, and more to come...

 

[maint.man]

I don't remember who it was , but someone in the TDR had a single pipe coming through the bed then to a closed up piece of square tube to 4' stacks I liked em' lots of volume and only one hole in the bed. T'd try a search for stacks.

[This message has been edited by maint. man (edited 04-26-2001). ]

 

[KWIKKURT]

Todd T & Maint. man . . that is how I was planning on building my "Cooling Towers". If I install the HX40 or other higher flow turbo I should be able to run 5" from the turbo back and up thru the bed then split into dual 4" "Smoke ejection Tubes". . #ad


------------------
"Have you driven OVER a phord lately"
2001 2500 BRT WHT SPORT QUADCAB 4X4 ETH 3. 54LSD TRLR CMPR PKG ALL OPT XCPT LTHR

[This message has been edited by KWIKKURT (edited 04-27-2001). ]

 

[strick]

Hey Frank. Did you decide to take the single stack back off? Or do you just want to add another one on the drivers side? I hope you were satisfied with the one I put on for you. I do have to admit it wasn't the best I've ever done, but then again we couldn't come up with all the pieces we needed. If you do put duals on I want to take a ride with you. I've been batting around the idea of putting another on my truck also. I get sick as hell of hearing people tell me that I need another stack! Nitwits! Talk to ya later. Jason

------------------
'99 3500HD flatbed, 5 spd 4:10 Posi, homebuilt underbody toolboxes & cowcatcher, 4" down w/straight stack(speak-up! I can't hear you!), K&N filter, what silencer ring? mudgrips, banks pyro & boost guage, sw fuel guage, 50% 3 wire BlueBox(HOLYSMOKE), Psycotty air, PS boost module w/ elbow, thinking about 1/2" fuel lines(real hard)
Jason

 

[Frank J. Lloyd]

Originally posted by strick:
Hey Frank. Did you decide to take the single stack back off? Or do you just want to add another one on the drivers side? I hope you were satisfied with the one I put on for you. I do have to admit it wasn't the best I've ever done, but then again we couldn't come up with all the pieces we needed. If you do put duals on I want to take a ride with you. I've been batting around the idea of putting another on my truck also. I get sick as hell of hearing people tell me that I need another stack! Nitwits! Talk to ya later. Jason

Actually I started this post before I got serious about putting a stack on. You put mine on about a month after the first post. I haven't quite decided on a second stack yet. Funds just got tight, I bought a house and the neighbors already frown on my flatbed, even more with the single stack, the double might just get me kicked out of the neighborhood association. I do like the sound though. Thanks again for the help, it couldn't have happened without you.



------------------
2001 3500 4x4 H. O. 6 speed 4. 10, SLT, Cab and Chassis, 163" wheelbase western hauler stake bed, silencer ring AWOL, boost & pyro gauge, K&N, Geno's one touch oil valve, Cobra 29 bombed, Halogen backup lights, cargo bed loading area flood lights, 6" driving lights, underbed boxes, pacbrake, 5" stack and exhaust, straight!
ready to bomb
Big Red is ready to roll!