2nd Gen Non-Engine/Transmission Stacks

[dclassens]

I was planning on running a single stack with straight pipe. Any body out there in TDR land have this set up? I would appreciate the feed back.

 

[tURBOdIEZEl]

PM wdimig, he is running straight pipe to a single turnout stack. . it looks and sounds nice.

 

[ramblin_on]

BBD, How's this? Clean and unseen! Tie down points are still useable too, I spent literally months thinking this setup - up.

How much do you have invested in this set up? If you don't mind me asking.

 

[THorlacher]

Check out my readers ride pictures. They are 5" bull haulers about 14" tall over cab due to the KC lights and headache rack everyone says they look good this tall. You can be your own judge but I like 'em tall. I have a 6x6 crossover box. My cat. convertor is still in tack. There is no drone and it is very quite in the cab. But from a distance behind the truck when I stand on it people say it barks pretty good. However this is a 2005 610 cummins and it is pretty quite by nature.

 

[Forrest Nearing]

those look like turnouts...

 

[CATCRACKER]

TH,

those are turnouts. i had a picture of a bullhaulers but not in this new computer..... bull haulers rock!

 

[GIT-R-DONE]

Here is another one that ASeigworth did... . Left the stacks about a foot high over the cab for the noise. I was considering cutting about 4" or so off the top to lower the overall height, but may go back to something like the RIP 4" system instead. Ready for another exhaust system install Al? :-laf

 

[Got Smoke?]

Check out my readers ride pictures. They are 5" bull haulers .

TH those are Turnout stacks, these are Bull Haulers



#ad