Stage 3 CP3 Pumps ...

[KevinO]

Are there any graphs to show the differences in flow and possible levels of pumps for sustainable HP between the different stages?

 

[WUnderwood]

OK, correct me please, but the stage 3 pump is between the Stage 2 pumps and Industrial's CP 3. 4?

 

[lmills]

OK, correct me please, but the stage 3 pump is between the Stage 2 pumps and Industrial's CP 3. 4?

yes, that is correct.

 

[RobertP]

we should have one comming our way very soon!!!!Oo. along with some other new goodies from II

 

[onestackdram]

Wow, it's so awesome that we can talk about modded CP3's and no one is fighting, lets keep it up. I am being truthfully honest here, i think its great, lets keep things informative not like it usually turns out.



Russell

 

[RobertP]

Wow, it's so awesome that we can talk about modded CP3's and no one is fighting, lets keep it up. I am being truthfully honest here, i think its great, lets keep things informative not like it usually turns out.



Russell

SSSSHHHHHH you might start something:-laf



i will let you know what we think about it next week.

 

[RFlies]

II makes a stage 3 now? What is it suppost to flow any idea?

 

[RCC]

I have always wanted for the guys modding cp3 pumps to give some kind of flow data versus a stock pump. I know they give a % more than stock,but what is the flow in cc's or however they measure it?The pumps have been proven to solve fueling issues, but I would still like to have some kind of concrete number,I mean if they are modding pumps,they have to have a test bench dont they?

 

[onestackdram]

I have always wanted for the guys modding cp3 pumps to give some kind of flow data versus a stock pump. I know they give a % more than stock,but what is the flow in cc's or however they measure it?The pumps have been proven to solve fueling issues, but I would still like to have some kind of concrete number,I mean if they are modding pumps,they have to have a test bench dont they?

It's nothing personal, but most shops won't release that info, mostly because of the competiion involved but also it's more of a propriety issue. But also pump stands are kinda like dynos. Just becuase you run (FOR EX. ) 400cc on one stand doesn't mean you will get those exact numbers on another somewhere else. So that is big reason why you get a percent over stock, it is a little easier to make those numbers make sense when you flow the stock on a bench then modify it and run it again on the same bench. I hope that makes a little more sense for those that have been begging for flow numbers. Also in the VP-44/CP-3 world benches aren't measuring cc's anymore, they are measured by litres.

 

[KevinO]

are there any percents for the new stage 3

 

[pipeguy]

43% more flow

 

[onestackdram]

43% more flow

I'm just curious, is that I. I. or Floor It's. I haven't gotten ahold of either yet to flow either one. So I have no idea

 

[RobertP]

I'm just curious, is that I. I. or Floor It's. I haven't gotten ahold of either yet to flow either one. So I have no idea

that is Industrials, stage 3