Stainless tailgate protector?

['956Wheel]

I there anyone who makes a stainless tailgate protector? I thought I had it in the bag, (sheet metal shop @ work), then I realized the tailgate has a wider center than its ends! #ad
I would guess the part would have to be made with a form die.

------------------
9535hundred

 

[Guest00]

I have PUCO bed rails and t/g rail as well as their front bed protector ( also goes over front rail ).

------------------
2K, 2500, Quad, SB, 4x4, 3:54LSD, A/T, Reese 15k 5th slider, EASLEY BULL BAR, WESTIN NERFS, TA's, 9000's,Cummins 505 ECM, stealth DD2's, Bully Dog Boost & elbow, ISSPRO pyro, boost & transmission, Turbo Lifesaver, JARDINE 4", DTT VB,TC,TC SAVER and AUX COOLER, PAC BRAKE, MAG HYTECH TP& DC, AFE filter onboard. Taylor Wing and Gear Vendors on order
pullee #1 26' Arctic Fox 5th
#2 22' car hauler w/ 76 Pinto 392cid or 68 Cyclone GT Cobra Jet FB
NRA-LIFE, VFW-LIFE, SoCSA-LIFE, SASS

 

[Andy Perreault]

That's what I have, I believe it's "Putco". I got mine at either Dick Cepek or Four Wheel Parts Wholesalers, I don't remember. It's a must-have item if you have a camper shell, because without it, the rubber seal on the rear hatch of the shell will rub through the paint on the tailgate.
Andy

 

[Rammin On]

I got mine at Auto Zone ... I have the smooth one . . you can also get a diamond tread one as well ... but I didn't want the shell hatch rubber strip to wear on the tread. If I recall this wass made by Putco. Cost less than $20. 00 Even drilled to use the existing screw holes.



------------------
'95 2500 Stretch 4X4, Auto, 3. 54, 265/75/16, white. TST #5 250/635 plate, 215/230 injectors, Pschotty Air, Cummins chrome, BD Valve Body, Pro-torque LS convertor, BD pressure-loc, mystery switch, JRE 4" turbo to tailpipe w/ monster tip, BD exhaust brake, ISSPRO boost and pyro, Grover air horns, Pioneer CD system, Galaxy 99 CB w/ 400 linear, nerf bars, Rancho 9000's, 8K tag-a-long RV ... Life is Good!