Steering Lubrication

[RJOL]

Okay, what am I missing here... . The maintenance schedule calls for regular lubrication of the "Tie Rod, Tie Rod Ends, and Drag linkage. " The only Zurk fitting I can find is on the front stabilizer bar. There are no fittings on any of the others, or at least if there is, I'm not familiar with how they are lubed. Any suggestions.



By the way, I have the maintenance manuals, but they don't show the lubrication points.

 

[Bob Wagner]

to do it right

you will need to drill and tap and install your own zerk fittings



Check the archives "dune racer" put together a great how to do instructions...

 

[Texas Diesel]

There are 3 zerks, the one you found and one on each upper ball joint.

 

[DUNE RACER]

RJOL, you will need to make your own "lubrication points" that the manual mentions. I did my front end like this-



https://www.turbodieselregister.com/forums/showthread.php?s=&threadid=16875&highlight=tierod