Steering wheel alignment

[45A1]

I replaced shocks today and put on a NAPA trackbar. Now the steering wheel is about 60 degrees off center. The truck still tracks straight so i think i just need to adjust the wheel back to center?? I hope. I know I read a thread on how to do it but couldnt find it again. Thanks

 

[SS]

45A1,



Sounds like the track bar length could be slightly off (especially if you don't have a lift and you only replaced the track bar). Make sure the axle is centered to the truck the way you want it before you adjust steering. Just a reminder in case you haven't already checked this.

 

[Rob Thomas]

45A1,the tie rod that goes to the steering box has a adj. sleeve in it . Just loosen the two bolts on it and turn the sleeve,not to much,maybee 1/4 turn,then test drive it. Adj as nessesary,remember to tighten the two bolts when your done or,:--) :--) :--)