Off Roading steering

[DIESELWRKS]

anyone using thuren's extreme duty steering setup on a 2nd gen. I cannot get his trac bar so I will look at dt-pro fabs and possible looking at his extreme duty steering setup. with this set up it looks like this may put more wear on my stock steering box. I have DSS steering support. any info out there would help



. : THUREN FABRICATION :.



DT PRODUCTS

 

[DIESELWRKS]

well does anyone have any ideas of a cross over steering system besides thuren.

thanks

 

[kenny61]

I think somebody posted something about a trac bar from rare parts or something like that in the 2nd generation section

 

[Bob4x4]

Get the 2nd to 3rd gen trac bar conversion bracket. then you can use any 3rd gen trac bar.

On the linkage... ... ... . rod ends will not live long. so figure on replacing the ends as a maint item if you go that route

 

[DIESELWRKS]

okay this is what I have now part of the DSS track bar bracket morphed together with the drop bracket kit from my lift kit. it okay but having some crack issues that I'm getting tired of welding. so I need to find a replacement bracket and trac bar that will work with my 6" lift. dt pro-fab has this but trying to get good or bad on this. also don thuren makes a Heavy duty cross over steering set up for our trucks seeing if anyone has any scoop on this.





2002 HO 6-SPD LB 4X4 QC HTT 62/14 SB-FE TST PM3/*REVO-BETA*SMARTY MACH 4'S, RINGED AND STUDS, AFE/2 " FTE 6" STACK D/PRICOL GAUGES, FASS 150, VULCAN 1/2 DRAW-STRAW, 3/8 FUEL LINE, DSS-TRAC-BAR STEER-BOX, AIR BAGS,17'' KMC BLACK HOSS, 315/70/17 MICKTHOM MTZ'S 6" RCD LONG ARM LIFT. :-laf... THANKS RIP Source Automotive Performance Diesel - Offline

 

[Hammer]

Here ya go for your steering upgrade needs... .

Some of the best steering parts I have seen in a long time... ... Andy



Welcome to the Genuine Bullet Proof Steering System Solution!