Here I am

Steerring Housing Torx screws

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Alignment shop near Las Vegas

One piece driveshaft for '04 (160" WB?)

Status
Not open for further replies.
Anyone know what size the torx screw heads are on the steering column of a 04 ram? I need to replace the turn signal switch.
 
I don't know the size of the screws, but is it just a switch you need to replace, or the entire "multi-function lever"? I've often wondered if the switching is separate, or if it is all one unit.
 
The windshield washer is not working and the blinkers take turns which side it is going to light up. It is also shorting out and drawing power all the time. Even when turned off.
 
Don't remember the size but it is easy to figure out from the left side. There is a hidden one that is very deep. You will need a very small extension or a long bit.
 
Use the link in post#4, its an excellent how-to with pics…also has the less expensive, warranty MFS part# posted in it later.
 
Status
Not open for further replies.
Back
Top