Stll waiting on a Fuel pressure gauge, what other sources?

[JaMan]

Have been waiting for a Westach fuel pressure gauge from Geno's for a month and it's still on backorder, are there any other sources for this FP gauge and sending unit or some other good options in the $80 range, need to replace my temp. one pretty quick. Looking for a 30psi gauge with a electric sending unit.





Thanks, Jared

 

[Joe G.]

Why not get hold of Westach directly at; http://www.westach.com/



They have a guy who answers all your questions and recommends things. I asked him if they had a 40 PSI guage and he replied that was no problem. That's what I have on my truck now. He is at: http://www.westach.com/tachman.htm

 

[dieselshu]

Fuel pressure gauge

Fuel pressure gauge You can see mine at My gauge



From what I was told by another TDR they dont make the rectangle gauge anymore, but do have the round. I have had mine installed for over two years and zero problems. The biggest thing to remember is DO NOT mount the sensor to the firewall or fender well, the vibrations from the engine will travel thru the hose that connects the sender to the engine and cause it to fail. I mounted mine to the dipstick bracket thats attaches to the intake manifold just behind dont forget to install a needle valve or restricted orifice(MCMaster-Carr) to reduce pulsations from the VP-44 that can cause sensor failure as well. Best of luck in finding what you are looking for, hope this helps.

Bomb on and on, and on... ... ...



Dave

 

[JaMan]

Does any other dealers sell the Westach gauge that might have one in stock, Genos said they were on backorder from Westach (something about changing the sending unit)????

 

[AMartinson]

If in fact they are changing the sending unit, you should probably wait and get the updated part. Maybe they have come up with a solution to sending unit failure.



May save you some trouble down the road.

 

[Bob Wagner]

Jaman I have one to sell you, its slightly used in great condition with sender. 0 - 16 psi

 

[JaMan]

Looking for a 30psi gauge Bob, thanks though. I guess a updated sending unit would be a benifit.