Here I am

Engine/Transmission (1998.5 - 2002) stock 6spd. clutch

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1998.5 - 2002) New transmission, Thanks Richard!

2nd Gen Non-Engine/Transmission 4" Exhaust ??

Status
Not open for further replies.
I'm planning on purchasing an edge juice/attitude in the next month or so and was wondering how much power my stock clutch can hold. I wont be doing any towing. I might throw in a set of edge jammer3 tips too, but will run the edge on stock or one of the other lower settings if need be. I mainly want the module for the gauges for right now. I can't afford a clutch at the moment, so this is why I'm asking. I'll also be adding a FASS or Airdog system at the same time so the liftpump side of things will be addressed. Thanks.
 
If you don't want to change your clutch just don't tap the pump wire and run the juice as a EZ. Dont even think about injectors until a clutch change (SOUTH BEND)



John
 
Status
Not open for further replies.
Back
Top