Engine/Transmission (1998.5 - 2002) stock exhuast on it's way out any recommendations?

[diesel DOG]

Stock exhaust is starting to have a few small rust holes. Any recommendations on SS replacement for it? Thanks!

 

[DixonL]

I put on a 4" stainless steel exhaust from MBRP. Very pleased with the fit and finish and the sound was great too :-laf The exhaust temp dropped a little a little also.



Thad (Ohio)

 

[diesel DOG]

what is the cost of it? All stainless? Single or dual?

 

[Turbo Tim 1]

Summit has Stainless exhaust for $399, I'm not sure if it's 409 or 304 though.

 

[Mark Craig]

diesel DOG,



Check the MBRP as they have 100% welded hangers just like the stock system, super easy install etc. If price is a consideration take a look at the AFE exhaust systems, same performance but will save some costs. We sell lots more MBRP than AFE but the AFE exhaust is new to the market too.



Mark @ DPPI

 

[MBFARMS]

I have a Magnaflow exhaust on my truck and really like it. All the hangers are welded on the pipes and is an easy install. I just wished my Magnaflow was a little louder. MBRP like said already makes a really good Exhaust and quality product. Let me know if I can help.

 

[klaybus]

Rips! http://www.sourceautomotive.biz/sa_dodge-exh.htm

$399 for the Stainless Steel Diamond Eye system.



Clay

 

[DixonL]

I ended up getting the 304 stainless from the turbo back single exit on a long bed truck. I paid around $700. 96 plus $40-50 for the stainless dual wall angle cut tip. The shipping was free. The regular tip comes with the kit (at no extra charge), but I really like the angle cut. I'm sure the 409-SS would have worked just fine, but I am planning on keeping this truck for a long time so what is an extra $200. 00 spread over the next 20 years?? I called 5-6 different dealers of MBRP and found the place that was competitive and that I also felt comfortable with. If you go to the MBRP website you can hear what the exhaust sounds like on your truck as they have a little video with sound.



Thad (Ohio)

 

[BTowler]

I have the Magnaflow and it is great, unless you plan on upgrading your turbo later. It has a 3. 5" down pipe, which is fine if you don't go to far over stock, but you will want to go 4" if you change turbos later.