Here I am

Stock front bumper source?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Noise Reduction

24valve warranty

Status
Not open for further replies.
I had the opportunity to shorten the rear end of an S-10 pickup last night and did a smashing job. Long story short, jerk cut in front and took up my stopping space at a traffic light, I was pulling about 8K in an enclosed trailer.

Damage was only to the front bumper, no sheet metal, grill, intercooler, radiator anything. Just shortened the S-10 by about 8 inches.

Problem: My '99 Sport Short Bed CTD QC 4x4 is in the shop for the input shaft (see "Auto transmission Upgrade" in 24 V Engine forum!) and this was my brothers '96 SLT Extended Cab 4x4 CTD!

I am looking for a good source for a factory chrome bumper - he wants his stock, no ifs, ands or buts.

Can anybody help me with a source? I'm in northern Utah.



Thanks,

Kevin
 
Got one

Thanks for everyones support on the bumper issue. I have located one (you da man Chace TX!) and am coordinating delivery now.



Thanks again!

Kevin
 
Try eBay Motors. I just bought a new in the box Mopar chrome rear bumper with hardware for $200... ... ... $515 from DC. Give it a shot.
 
I know you got your problem fixxed but I got a new bumper for my girlfriends jeep at the local 4x4 shop. It was a take off at 125 miles and he gave it to me for $50 cash.



He said he had all kinds of bumpers and if I ever needed another to come back and have a look in the pile.
 
Status
Not open for further replies.
Back
Top