stock wheel width/backspace/offset??

[p-Bar]

What is the stock wheel width and backspacing and offset if any. Looking for new wheels and I don't want them sticking out.



Don

 

[Ereynolds72]

THere's plenty of discussion on this subject... . you can do a search for "wheels" and sift through the posts. If I'm not mistaken though, the backspace is something like 6. 25" and -40mm offset. There are very few aftermarket wheels with match specs but some guys have found some that are close. Be mindfult of the centerbore too; the factory wheels fit very snugly aroung the hub.

 

[Greg Boardman-RIP]

Ereynolds72 is correct about the center bore. 4. 780" is the factory center bore.

Greg DRC

 

[Spooled-up]

The stock wheels are 8" wide also.



I heard they changed the wheel size in '06. Is this correct? What is different?

 

[Greg Boardman-RIP]

Stock wheel is 17x8. 5 6. 250 back.



All aluminum wheels, cast or forged are the same.

Greg DRC

 

[JVolpe]

I have had a set of Dodge 04. 5 alloy wheels, and two sets of Dodge 04 steel chrome clad wheels, they were all 17x8.

 

[p-Bar]

Thanks guys for the help . I found some pro comp 18" 9" w 5" backspace

0 offset I think they will tuck in nicely on the front

 

[Greg Boardman-RIP]

The 9 inch wheel will rub with a 35 inch tire. Unless you are running at least 5. 5 inches of lift.

Greg DRC

 

[p-Bar]

The 9 inch wheel will rub with a 35 inch tire. Unless you are running at least 5. 5 inches of lift.

Greg DRC

Greg,

I am 2wd with a 3" lift to level out I am using 33" dia tires 27570r18 what do you think.



Don