stuck fuel injectors

[MikeWinter]

Any tips or tricks to removing fuel injectors? 4 of them came out difficult, but as expected. Two of them wont budge. Tried threading a nut on end and using slide hammer technique... ... . Didn't work. Soaking them with penetrant now. Anything else I can try?





Mike

 

[JLEONARD]

You can also use a prybar but I always found the slide hammer easier.

You can try several light taps with the slide hammer to attempt to break up the corrosion, then one big one to remove it.

Give the penetrant a day to work and they should come out if the above method fails.

 

[JHumphries]

Is there too much metal in the area to use a heat gun on the head?

 

[GOTSOOT]

use the slide hammer,and have someone else use a pry bar at the same time. don`t get discouraged,steady hitting on the slide will set up some kind of vibs and it will come out. PB Blaster,Liquid Wrench,spray it go get a beer,drink the beer!!tap tap tap go get more beer,it will move!