So last Friday I popped the valve cover to check my valve lash. All is good there. Apparently when I re-used the re-usable gasket I got it hung up on something.
I would venture to guess 3 quarts of oil lost starting from the back of the valve cover, down the side of hte motor, behind the bellhousing (no clutch slippage... ... )down and out of breather hole on the underside of hte bell housing. Coated the transmission, exhuast and anything else in the path of the wind under the truck. . Even got the chrome side of the bumper, my initial tip off that something was wrong, or atleast "what the heck did I drive though?!?!).
So, at 10am I'll see if one of the 2 20mile away napa's that carry Amsoil has any in stock. Just do a complete oil change and filter.
Wonder how many cans of engine cleaner I need for this clean up.....
I would venture to guess 3 quarts of oil lost starting from the back of the valve cover, down the side of hte motor, behind the bellhousing (no clutch slippage... ... )down and out of breather hole on the underside of hte bell housing. Coated the transmission, exhuast and anything else in the path of the wind under the truck. . Even got the chrome side of the bumper, my initial tip off that something was wrong, or atleast "what the heck did I drive though?!?!).
So, at 10am I'll see if one of the 2 20mile away napa's that carry Amsoil has any in stock. Just do a complete oil change and filter.
Wonder how many cans of engine cleaner I need for this clean up.....