Engine/Transmission (1994 - 1998) suggestions,advise

[kbbt]

I dynoed at the edge event last weekend and ended up with 441hp 764tq #@$%! somethings not right. With the mods I have I should be well over 500hp. The tq seemed way low too, even for 441hp. I have a feeling that something is wrong with my transmission. :{ Any other suggestions on what I could check would be appreciated.

Thanks, Corey

 

[bmoeller]

May need more air.



I put down a best of 363/793 at IRP '06. Stock GSK, too.

 

[kbbt]

I have plenty of air with the twins (need to update sig) one thing I forgot to mention, I dynoed at may madness before I put the twins on and got 464hp, different type of dyno though.

 

[DSahd]

Depending on who runs the dyno, they can give values that include the drag coeficient (actual values at wheels), or engine values that do not include the drag calculation. Drag is the amount of power that is robbed from the engine to the wheels due to the drivetrain etc. I dyno bikes all the time and that is one of the most common differences. Guys will come with these high values and when I dyno them, I get the same value without the drag calibration. With the drag value... those high values are radically reduced.

Just a thought. .