Super heavy duty Ball joints

[JEstes]

Yes as a rule most are only going through uppers.



Bob

Thanks! I've got just shy of 100k on mine, and I can hear a little thump sometimes... . I guess I'll probably be putting a set of these on there.

 

[steved]

Seems kinda silly to replace the top with this massive replacement, only to have the smallish stocker in the bottom.

 

[Regcabguy]

Carli ball joints.

Seems kinda silly to replace the top with this massive replacement, only to have the smallish stocker in the bottom.

Sage and Baja Mike explained to me that the uppers were their first priority on these things as they apparently support most of the weight by the design of the American Axle setup. I'm sure they're working on the bottoms as we speak. It's always a joy for me to go to their shop and sense their enthusiasm for dialing in these trucks.

 

[firemansdiesel]

I will be getting mine next week along w/ other components. Another road trip down south again. :-laf

 

[JRespecki]

Any chance of a Dana 60 2nd gen set?

 

[Bob4x4]

No plans at this time... ... ... ... ... but if they got enough request who knows>

 

[LVJUNIOR]

I would be interested. my truck has a curb weight of 9200# and I drive it pretty rough off road